pike.git / lib / modules / Calendar.pmod / tzdata / Makefile

version» Context lines:

pike.git/lib/modules/Calendar.pmod/tzdata/Makefile:35:   # Use the command   # make zonenames   # to get a list of the values you can use for POSIXRULES.   # If you want POSIX compatibility, use "America/New_York".      POSIXRULES= America/New_York      # Also see TZDEFRULESTRING below, which takes effect only   # if the time zone files cannot be accessed.    - # Everything gets put in subdirectories of. . . +     - TOPDIR= /usr/local + # Installation locations. + # + # The defaults are suitable for Debian, except that if REDO is + # posix_right or right_posix then files that Debian puts under + # /usr/share/zoneinfo/posix and /usr/share/zoneinfo/right are instead + # put under /usr/share/zoneinfo-posix and /usr/share/zoneinfo-leaps, + # respectively. Problems with the Debian approach are discussed in + # the commentary for the right_posix rule (below).    -  + # Destination directory, which can be used for staging. + # 'make DESTDIR=/stage install' installs under /stage (e.g., to + # /stage/etc/localtime instead of to /etc/localtime). Files under + # /stage are not intended to work as-is, but can be copied by hand to + # the root directory later. If DESTDIR is empty, 'make install' does + # not stage, but installs directly into production locations. + DESTDIR = +  + # Everything is installed into subdirectories of TOPDIR, and used there. + # TOPDIR should be empty (meaning the root directory), + # or a directory name that does not end in "/". + # TOPDIR should be empty or an absolute name unless you're just testing. + TOPDIR = +  + # The default local time zone is taken from the file TZDEFAULT. + TZDEFAULT = $(TOPDIR)/etc/localtime +  + # The subdirectory containing installed program and data files, and + # likewise for installed files that can be shared among architectures. + # These should be relative file names. + USRDIR = usr + USRSHAREDIR = $(USRDIR)/share +    # "Compiled" time zone information is placed in the "TZDIR" directory   # (and subdirectories). - # Use an absolute path name for TZDIR unless you're just testing the software. +    # TZDIR_BASENAME should not contain "/" and should not be ".", ".." or empty. -  +    TZDIR_BASENAME= zoneinfo - TZDIR= $(TOPDIR)/etc/$(TZDIR_BASENAME) + TZDIR = $(TOPDIR)/$(USRSHAREDIR)/$(TZDIR_BASENAME)    - # Types to try, as an alternative to time_t. int64_t should be first. - TIME_T_ALTERNATIVES= int64_t int32_t uint32_t uint64_t + # The "tzselect" and (if you do "make INSTALL") "date" commands go in: + BINDIR = $(TOPDIR)/$(USRDIR)/bin    - # The "tzselect", "zic", and "zdump" commands get installed in. . . + # The "zdump" command goes in: + ZDUMPDIR = $(BINDIR)    - ETCDIR= $(TOPDIR)/etc + # The "zic" command goes in: + ZICDIR = $(TOPDIR)/$(USRDIR)/sbin    - # If you "make INSTALL", the "date" command gets installed in. . . -  - BINDIR= $(TOPDIR)/bin -  +    # Manual pages go in subdirectories of. . . -  + MANDIR = $(TOPDIR)/$(USRSHAREDIR)/man    - MANDIR= $(TOPDIR)/man -  +    # Library functions are put in an archive in LIBDIR. -  + LIBDIR = $(TOPDIR)/$(USRDIR)/lib    - LIBDIR= $(TOPDIR)/lib +     -  + # Types to try, as an alternative to time_t. int64_t should be first. + TIME_T_ALTERNATIVES = int64_t int32_t uint32_t uint64_t +    # If you want only POSIX time, with time values interpreted as   # seconds since the epoch (not counting leap seconds), use   # REDO= posix_only   # below. If you want only "right" time, with values interpreted   # as seconds since the epoch (counting leap seconds), use   # REDO= right_only   # below. If you want both sets of data available, with leap seconds not   # counted normally, use   # REDO= posix_right   # below. If you want both sets of data available, with leap seconds counted
pike.git/lib/modules/Calendar.pmod/tzdata/Makefile:98:   # TZDATA_TEXT= tzdata.zi leapseconds   # To install text data without leap second information (e.g., because   # REDO='posix_only'), use   # TZDATA_TEXT= tzdata.zi   # To avoid installing text data, use   # TZDATA_TEXT=      TZDATA_TEXT= leapseconds tzdata.zi      # For backward-compatibility links for old zone names, use + # BACKWARD= backward + # If you also want the link US/Pacific-New, even though it is confusing + # and is planned to be removed from the database eventually, use   # BACKWARD= backward pacificnew   # To omit these links, use   # BACKWARD=    - BACKWARD= backward pacificnew + BACKWARD= backward      # If you want out-of-scope and often-wrong data from the file 'backzone', use   # PACKRATDATA= backzone   # To omit this data, use   # PACKRATDATA=      PACKRATDATA=      # The name of a locale using the UTF-8 encoding, used during self-tests.   # The tests are skipped if the name does not appear to work on this system.
pike.git/lib/modules/Calendar.pmod/tzdata/Makefile:306:      # The zic command and its arguments.      zic= ./zic   ZIC= $(zic) $(ZFLAGS)      ZFLAGS=      # How to use zic to install tz binary files.    - ZIC_INSTALL= $(ZIC) -d $(DESTDIR)$(TZDIR) $(LEAPSECONDS) + ZIC_INSTALL= $(ZIC) -d '$(DESTDIR)$(TZDIR)' $(LEAPSECONDS)      # The name of a Posix-compliant 'awk' on your system.   AWK= awk      # The full path name of a Posix-compliant shell, preferably one that supports   # the Korn shell's 'select' statement as an extension.   # These days, Bash is the most popular.   # It should be OK to set this to /bin/sh, on platforms where /bin/sh   # lacks 'select' or doesn't completely conform to Posix, but /bin/bash   # is typically nicer if it works.
pike.git/lib/modules/Calendar.pmod/tzdata/Makefile:334:   SGML_CATALOG_FILES= \    $(SGML_TOPDIR)/share/doc/w3-recs/html/www.w3.org/TR/1999/REC-html401-19991224/HTML4.cat:$(SGML_TOPDIR)/share/sgml/html/4.01/HTML4.cat      # The name, arguments and environment of a program to validate your web pages.   # See <http://openjade.sourceforge.net/doc/> for a validator, and   # <https://validator.w3.org/source/> for a validation library.   # Set VALIDATE=':' if you do not have such a program.   VALIDATE = nsgmls   VALIDATE_FLAGS = -s -B -wall -wno-unused-param   VALIDATE_ENV = \ -  SGML_CATALOG_FILES=$(SGML_CATALOG_FILES) \ -  SGML_SEARCH_PATH=$(SGML_SEARCH_PATH) \ +  SGML_CATALOG_FILES='$(SGML_CATALOG_FILES)' \ +  SGML_SEARCH_PATH='$(SGML_SEARCH_PATH)' \    SP_CHARSET_FIXED=YES \    SP_ENCODING=UTF-8      # This expensive test requires USE_LTZ.   # To suppress it, define this macro to be empty.   CHECK_TIME_T_ALTERNATIVES = check_time_t_alternatives      # SAFE_CHAR is a regular expression that matches a safe character.   # Some parts of this distribution are limited to safe characters;   # others can use any UTF-8 character.
pike.git/lib/modules/Calendar.pmod/tzdata/Makefile:389:    fi`      # Flags to give 'gzip' when making a distribution.   GZIPFLAGS= -9n      ###############################################################################      #MAKE= make      cc= cc - CC= $(cc) -DTZDIR=\"$(TZDIR)\" + CC= $(cc) -DTZDIR='"$(TZDIR)"'      AR= ar      # ':' on typical hosts; 'ranlib' on the ancient hosts that still need ranlib.   RANLIB= :      TZCOBJS= zic.o   TZDOBJS= zdump.o localtime.o asctime.o strftime.o   DATEOBJS= date.o localtime.o strftime.o asctime.o   LIBSRCS= localtime.c asctime.c difftime.c
pike.git/lib/modules/Calendar.pmod/tzdata/Makefile:414:   SOURCES= $(HEADERS) $(LIBSRCS) $(NONLIBSRCS) $(NEWUCBSRCS) \    tzselect.ksh workman.sh   MANS= newctime.3 newstrftime.3 newtzset.3 time2posix.3 \    tzfile.5 tzselect.8 zic.8 zdump.8   MANTXTS= newctime.3.txt newstrftime.3.txt newtzset.3.txt \    time2posix.3.txt \    tzfile.5.txt tzselect.8.txt zic.8.txt zdump.8.txt \    date.1.txt   COMMON= calendars CONTRIBUTING LICENSE Makefile \    NEWS README theory.html version - WEB_PAGES= tz-art.htm tz-how-to.html tz-link.htm + WEB_PAGES= tz-art.html tz-how-to.html tz-link.html   DOCS= $(MANS) date.1 $(MANTXTS) $(WEB_PAGES)   PRIMARY_YDATA= africa antarctica asia australasia \    europe northamerica southamerica - YDATA= $(PRIMARY_YDATA) etcetera $(BACKWARD) + YDATA= $(PRIMARY_YDATA) etcetera   NDATA= systemv factory - TDATA= $(YDATA) $(NDATA) + TDATA_TO_CHECK= $(YDATA) $(NDATA) backward pacificnew + TDATA= $(YDATA) $(NDATA) $(BACKWARD)   ZONETABLES= zone1970.tab zone.tab   TABDATA= iso3166.tab $(TZDATA_TEXT) $(ZONETABLES)   LEAP_DEPS= leapseconds.awk leap-seconds.list - TZDATA_ZI_DEPS= zishrink.awk $(TDATA) $(PACKRATDATA) - DATA= $(YDATA) $(NDATA) backzone iso3166.tab leap-seconds.list \ + TZDATA_ZI_DEPS= zishrink.awk version $(TDATA) $(PACKRATDATA) + DATA= $(TDATA_TO_CHECK) backzone iso3166.tab leap-seconds.list \    leapseconds yearistype.sh $(ZONETABLES)   AWK_SCRIPTS= checklinks.awk checktab.awk leapseconds.awk zishrink.awk   MISC= $(AWK_SCRIPTS) zoneinfo2tdf.pl   TZS_YEAR= 2050   TZS= to$(TZS_YEAR).tzs   TZS_NEW= to$(TZS_YEAR)new.tzs   TZS_DEPS= $(PRIMARY_YDATA) asctime.c localtime.c \    private.h tzfile.h zdump.c zic.c   ENCHILADA= $(COMMON) $(DOCS) $(SOURCES) $(DATA) $(MISC) $(TZS) tzdata.zi   
pike.git/lib/modules/Calendar.pmod/tzdata/Makefile:450:    calendars CONTRIBUTING LICENSE Makefile NEWS README \    africa antarctica asctime.c asia australasia \    backward backzone \    checklinks.awk checktab.awk \    date.1 date.c difftime.c \    etcetera europe factory iso3166.tab \    leap-seconds.list leapseconds.awk localtime.c \    newctime.3 newstrftime.3 newtzset.3 northamerica \    pacificnew private.h \    southamerica strftime.c systemv theory.html \ -  time2posix.3 tz-art.htm tz-how-to.html tz-link.htm \ +  time2posix.3 tz-art.html tz-how-to.html tz-link.html \    tzfile.5 tzfile.h tzselect.8 tzselect.ksh \    workman.sh yearistype.sh \    zdump.8 zdump.c zic.8 zic.c \    zone.tab zone1970.tab zoneinfo2tdf.pl      # And for the benefit of csh users on systems that assume the user   # shell should be used to handle commands in Makefiles. . .      SHELL= /bin/sh      all: tzselect yearistype zic zdump libtz.a $(TABDATA)      ALL: all date $(ENCHILADA)      install: all $(DATA) $(REDO) $(MANS) -  mkdir -p $(DESTDIR)$(ETCDIR) $(DESTDIR)$(TZDIR) \ -  $(DESTDIR)$(LIBDIR) \ -  $(DESTDIR)$(MANDIR)/man3 $(DESTDIR)$(MANDIR)/man5 \ -  $(DESTDIR)$(MANDIR)/man8 -  $(ZIC_INSTALL) -l $(LOCALTIME) -p $(POSIXRULES) -  cp -f $(TABDATA) $(DESTDIR)$(TZDIR)/. -  cp tzselect zic zdump $(DESTDIR)$(ETCDIR)/. -  cp libtz.a $(DESTDIR)$(LIBDIR)/. -  $(RANLIB) $(DESTDIR)$(LIBDIR)/libtz.a -  cp -f newctime.3 newtzset.3 $(DESTDIR)$(MANDIR)/man3/. -  cp -f tzfile.5 $(DESTDIR)$(MANDIR)/man5/. -  cp -f tzselect.8 zdump.8 zic.8 $(DESTDIR)$(MANDIR)/man8/. +  mkdir -p '$(DESTDIR)$(BINDIR)' \ +  '$(DESTDIR)$(ZDUMPDIR)' '$(DESTDIR)$(ZICDIR)' \ +  '$(DESTDIR)$(LIBDIR)' \ +  '$(DESTDIR)$(MANDIR)/man3' '$(DESTDIR)$(MANDIR)/man5' \ +  '$(DESTDIR)$(MANDIR)/man8' +  $(ZIC_INSTALL) -l $(LOCALTIME) -p $(POSIXRULES) \ +  -t '$(DESTDIR)$(TZDEFAULT)' +  cp -f $(TABDATA) '$(DESTDIR)$(TZDIR)/.' +  cp tzselect '$(DESTDIR)$(BINDIR)/.' +  cp zdump '$(DESTDIR)$(ZDUMPDIR)/.' +  cp zic '$(DESTDIR)$(ZICDIR)/.' +  cp libtz.a '$(DESTDIR)$(LIBDIR)/.' +  $(RANLIB) '$(DESTDIR)$(LIBDIR)/libtz.a' +  cp -f newctime.3 newtzset.3 '$(DESTDIR)$(MANDIR)/man3/.' +  cp -f tzfile.5 '$(DESTDIR)$(MANDIR)/man5/.' +  cp -f tzselect.8 zdump.8 zic.8 '$(DESTDIR)$(MANDIR)/man8/.'      INSTALL: ALL install date.1 -  mkdir -p $(DESTDIR)$(BINDIR) $(DESTDIR)$(MANDIR)/man1 -  cp date $(DESTDIR)$(BINDIR)/. -  cp -f date.1 $(DESTDIR)$(MANDIR)/man1/. +  mkdir -p '$(DESTDIR)$(BINDIR)' '$(DESTDIR)$(MANDIR)/man1' +  cp date '$(DESTDIR)$(BINDIR)/.' +  cp -f date.1 '$(DESTDIR)$(MANDIR)/man1/.'      version: $(VERSION_DEPS)    { (type git) >/dev/null 2>&1 && \    V=`git describe --match '[0-9][0-9][0-9][0-9][a-z]*' \    --abbrev=7 --dirty` || \ -  V=$(VERSION); } && \ +  V='$(VERSION)'; } && \    printf '%s\n' "$$V" >$@.out    mv $@.out $@      # This file can be tailored by setting BACKWARD, PACKRATDATA, etc.   tzdata.zi: $(TZDATA_ZI_DEPS) -  LC_ALL=C $(AWK) -f zishrink.awk $(TDATA) $(PACKRATDATA) >$@.out +  version=`sed 1q version` && \ +  LC_ALL=C $(AWK) -v version="$$version" -f zishrink.awk \ +  $(TDATA) $(PACKRATDATA) >$@.out    mv $@.out $@      version.h: version    VERSION=`cat version` && printf '%s\n' \    'static char const PKGVERSION[]="($(PACKAGE)) ";' \    "static char const TZVERSION[]=\"$$VERSION\";" \    'static char const REPORT_BUGS_TO[]="$(BUGEMAIL)";' \    >$@.out    mv $@.out $@   
pike.git/lib/modules/Calendar.pmod/tzdata/Makefile:522:    cp yearistype.sh yearistype    chmod +x yearistype      leapseconds: $(LEAP_DEPS)    $(AWK) -f leapseconds.awk leap-seconds.list >$@.out    mv $@.out $@      # Arguments to pass to submakes of install_data.   # They can be overridden by later submake arguments.   INSTALLARGS = \ -  BACKWARD=$(BACKWARD) \ -  DESTDIR=$(DESTDIR) \ +  BACKWARD='$(BACKWARD)' \ +  DESTDIR='$(DESTDIR)' \    LEAPSECONDS='$(LEAPSECONDS)' \    PACKRATDATA='$(PACKRATDATA)' \ -  TZDIR=$(TZDIR) \ -  YEARISTYPE=$(YEARISTYPE) \ +  TZDEFAULT='$(TZDEFAULT)' \ +  TZDIR='$(TZDIR)' \ +  YEARISTYPE='$(YEARISTYPE)' \    ZIC='$(ZIC)'      # 'make install_data' installs one set of tz binary files.   install_data: zic leapseconds yearistype tzdata.zi    $(ZIC_INSTALL) tzdata.zi      posix_only:    $(MAKE) $(INSTALLARGS) LEAPSECONDS= install_data      right_only:
pike.git/lib/modules/Calendar.pmod/tzdata/Makefile:551:   # In earlier versions of this makefile, the other two directories were   # subdirectories of $(TZDIR). However, this led to configuration errors.   # For example, with posix_right under the earlier scheme,   # TZ='right/Australia/Adelaide' got you localtime with leap seconds,   # but gmtime without leap seconds, which led to problems with applications   # like sendmail that subtract gmtime from localtime.   # Therefore, the other two directories are now siblings of $(TZDIR).   # You must replace all of $(TZDIR) to switch from not using leap seconds   # to using them, or vice versa.   right_posix: right_only -  rm -fr $(DESTDIR)$(TZDIR)-leaps -  ln -s $(TZDIR_BASENAME) $(DESTDIR)$(TZDIR)-leaps || \ -  $(MAKE) $(INSTALLARGS) TZDIR=$(TZDIR)-leaps right_only -  $(MAKE) $(INSTALLARGS) TZDIR=$(TZDIR)-posix posix_only +  rm -fr '$(DESTDIR)$(TZDIR)-leaps' +  ln -s '$(TZDIR_BASENAME)' '$(DESTDIR)$(TZDIR)-leaps' || \ +  $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-leaps' right_only +  $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-posix' posix_only      posix_right: posix_only -  rm -fr $(DESTDIR)$(TZDIR)-posix -  ln -s $(TZDIR_BASENAME) $(DESTDIR)$(TZDIR)-posix || \ -  $(MAKE) $(INSTALLARGS) TZDIR=$(TZDIR)-posix posix_only -  $(MAKE) $(INSTALLARGS) TZDIR=$(TZDIR)-leaps right_only +  rm -fr '$(DESTDIR)$(TZDIR)-posix' +  ln -s '$(TZDIR_BASENAME)' '$(DESTDIR)$(TZDIR)-posix' || \ +  $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-posix' posix_only +  $(MAKE) $(INSTALLARGS) TZDIR='$(TZDIR)-leaps' right_only      # This obsolescent rule is present for backwards compatibility with   # tz releases 2014g through 2015g. It should go away eventually.   posix_packrat:    $(MAKE) $(INSTALLARGS) PACKRATDATA=backzone posix_only      zones: $(REDO)      $(TZS_NEW): tzdata.zi zdump zic    mkdir -p tzs.dir
pike.git/lib/modules/Calendar.pmod/tzdata/Makefile:626:   check_character_set: $(ENCHILADA)    test ! '$(UTF8_LOCALE)' || \    ! printf 'A\304\200B\n' | \    LC_ALL='$(UTF8_LOCALE)' grep -q '^A.B$$' >/dev/null 2>&1 || { \    LC_ALL='$(UTF8_LOCALE)' && export LC_ALL && \    sharp='#' && \    ! grep -Env $(SAFE_LINE) $(MANS) date.1 $(MANTXTS) \    $(MISC) $(SOURCES) $(WEB_PAGES) \    CONTRIBUTING LICENSE Makefile README \    version tzdata.zi && \ -  ! grep -Env $(SAFE_SHARP_LINE) $(TDATA) backzone \ +  ! grep -Env $(SAFE_SHARP_LINE) $(TDATA_TO_CHECK) backzone \    leapseconds yearistype.sh zone.tab && \    ! grep -Env $(OK_LINE) $(ENCHILADA); \    }      check_white_space: $(ENCHILADA)    patfmt=' \t|[\f\r\v]' && pat=`printf "$$patfmt\\n"` && \    ! grep -En "$$pat" $(ENCHILADA) -  ! grep -n '[[:space:]]$$' $(ENCHILADA) +  ! grep -n '[[:space:]]$$' \ +  $$(ls $(ENCHILADA) | grep -Fvx leap-seconds.list)      PRECEDES_FILE_NAME = ^(Zone|Link[[:space:]]+[^[:space:]]+)[[:space:]]+   FILE_NAME_COMPONENT_TOO_LONG = \    $(PRECEDES_FILE_NAME)[^[:space:]]*[^/[:space:]]{15}    - check_name_lengths: $(TDATA) backzone -  ! grep -En '$(FILE_NAME_COMPONENT_TOO_LONG)' $(TDATA) backzone + check_name_lengths: $(TDATA_TO_CHECK) backzone +  ! grep -En '$(FILE_NAME_COMPONENT_TOO_LONG)' \ +  $(TDATA_TO_CHECK) backzone      CHECK_CC_LIST = { n = split($$1,a,/,/); for (i=2; i<=n; i++) print a[1], a[i]; }      check_sorted: backward backzone iso3166.tab zone.tab zone1970.tab    $(AWK) '/^Link/ {print $$3}' backward | LC_ALL=C sort -cu    $(AWK) '/^Zone/ {print $$2}' backzone | LC_ALL=C sort -cu    $(AWK) '/^[^#]/ {print $$1}' iso3166.tab | LC_ALL=C sort -cu    $(AWK) '/^[^#]/ {print $$1}' zone.tab | LC_ALL=C sort -c    $(AWK) '/^[^#]/ {print substr($$0, 1, 2)}' zone1970.tab | \    LC_ALL=C sort -c    $(AWK) '/^[^#]/ $(CHECK_CC_LIST)' zone1970.tab | \    LC_ALL=C sort -cu    - check_links: checklinks.awk $(TDATA) -  $(AWK) -f checklinks.awk $(TDATA) + check_links: checklinks.awk $(TDATA_TO_CHECK) +  $(AWK) -f checklinks.awk $(TDATA_TO_CHECK)    $(AWK) -f checklinks.awk tzdata.zi      check_tables: checktab.awk $(PRIMARY_YDATA) $(ZONETABLES)    for tab in $(ZONETABLES); do \    $(AWK) -f checktab.awk -v zone_table=$$tab $(PRIMARY_YDATA) \    || exit; \    done      check_tzs: $(TZS) $(TZS_NEW)    diff -u $(TZS) $(TZS_NEW)
pike.git/lib/modules/Calendar.pmod/tzdata/Makefile:757:    touch -cmr `ls -t $(TZDATA_ZI_DEPS) | sed 1q` tzdata.zi    touch -cmr `ls -t $(TZS_DEPS) | sed 1q` $(TZS)    touch -cmr `ls -t $(VERSION_DEPS) | sed 1q` version    touch $@      # The zics below ensure that each data file can stand on its own.   # We also do an all-files run to catch links to links.      check_public:    $(MAKE) maintainer-clean -  $(MAKE) "CFLAGS=$(GCC_DEBUG_FLAGS)" ALL +  $(MAKE) CFLAGS='$(GCC_DEBUG_FLAGS)' ALL    mkdir -p public.dir -  for i in $(TDATA) tzdata.zi; do \ +  for i in $(TDATA_TO_CHECK) tzdata.zi; do \    $(zic) -v -d public.dir $$i 2>&1 || exit; \    done -  $(zic) -v -d public.dir $(TDATA) +  $(zic) -v -d public.dir $(TDATA_TO_CHECK)    rm -fr public.dir      # Check that the code works under various alternative   # implementations of time_t.   check_time_t_alternatives:    if diff -q Makefile Makefile 2>/dev/null; then \    quiet_option='-q'; \    else \    quiet_option=''; \    fi && \    wd=`pwd` && \    zones=`$(AWK) '/^[^#]/ { print $$3 }' <zone1970.tab` && \    for type in $(TIME_T_ALTERNATIVES); do \    mkdir -p time_t.dir/$$type && \    $(MAKE) clean_misc && \    $(MAKE) TOPDIR="$$wd/time_t.dir/$$type" \    CFLAGS='$(CFLAGS) -Dtime_tz='"'$$type'" \    REDO='$(REDO)' \    install && \    diff $$quiet_option -r \ -  time_t.dir/int64_t/etc/zoneinfo \ -  time_t.dir/$$type/etc/zoneinfo && \ +  time_t.dir/int64_t/etc \ +  time_t.dir/$$type/etc && \ +  diff $$quiet_option -r \ +  time_t.dir/int64_t/usr/share \ +  time_t.dir/$$type/usr/share && \    case $$type in \    int32_t) range=-2147483648,2147483647;; \    uint32_t) range=0,4294967296;; \    int64_t) continue;; \    *u*) range=0,10000000000;; \    *) range=-10000000000,10000000000;; \    esac && \    echo checking $$type zones ... && \ -  time_t.dir/int64_t/etc/zdump -V -t $$range $$zones \ +  time_t.dir/int64_t/usr/bin/zdump -V -t $$range $$zones \    >time_t.dir/int64_t.out && \ -  time_t.dir/$$type/etc/zdump -V -t $$range $$zones \ +  time_t.dir/$$type/usr/bin/zdump -V -t $$range $$zones \    >time_t.dir/$$type.out && \    diff -u time_t.dir/int64_t.out time_t.dir/$$type.out \    || exit; \    done    rm -fr time_t.dir      tarballs traditional_tarballs signatures traditional_signatures: version    VERSION=`cat version` && \    $(MAKE) VERSION="$$VERSION" $@_version