pike.git / src / Makefile.in

version» Context lines:

pike.git/src/Makefile.in:1:    - # This line is needed on some machines. - @SET_MAKE@ -  - # Pike embed target, either libpike.so or libpike.a. - PIKE_LIB=@PIKE_LIB@ -  - # Don't change this line. Define EXTRALIBS before this line if you - # wish to add any libraries. - LIBS=@LIBS@ $(EXTRALIBS) -  - # This is normall the install program in the source directory - INSTALL=@INSTALL@ -  - SRCDIR=@srcdir@ - VPATH=@srcdir@ -  - # These are used while compiling - LIBDIR_SRC = @LIBDIR@ - TMP_BINDIR = @BINDIR@ - TMP_BUILDDIR = @BUILDDIR@ - TMP_LIBDIR = $(TMP_BUILDDIR)/lib -  - # This is used during autodoc extraction. - DOCDIR = @DOCDIR@ -  - # These are used during binary exports and installation. - MANDIR_SRC = @MANDIR@ - DOCDIR_SRC = @DOCDIR@ - BASEDIR = @BASEDIR@ - PACKAGINGDIR = $(SRCDIR)/../packaging -  - # These are used by the files generated by fixdepends.sh - PIKE_SRC_DIR=$(SRCDIR) - BUILD_BASE= -  - # The precompiler API level used by cmod files in the src root directory. - PRECOMPILER_ARGS=--api=3 -  - # - # RPM and package builders, listen up, because this is your only - # documentation! This variable is prepended to the install path. - # Please note that Pike will not work until moved into the proper - # place. -Hubbe - # - buildroot= -  - prefix = @prefix@ - exec_prefix = @exec_prefix@ - bindir = @bindir@ - lib_prefix = @libdir@/pike - data_prefix = @datadir@ - share_prefix = $(data_prefix)/pike - man_prefix = @mandir@ - include_prefix = @includedir@/pike -  - # Arguments for test_pike.pike used by the verify targets. - # TESTARGS = -F -a -  - # Arguments for install.pike used by the install targets. - INSTALLARGS = --new-style -  - # - # use bison please, yacc isn't good enough. - # - YACC=@YACC@ - YFLAGS=-d -v -  - # - # This may be -pg - # - PROFIL=@PROFIL@ -  - # - # OS dependant flags - # - OSFLAGS=@OSFLAGS@ -  - # - #Enable warnings from the compiler, if wanted. - # - WARN=@WARN@ -  - #add extra defines here - DEFINES=@CPPFLAGS@ -DPIKE_CORE -  - # -O should work with all compilers - OPTIMIZE=@OPTIMIZE@ -  - # interpret.o can't have -fomit-frame-pointer - INTERPRET_DEOPTIMIZE=@INTERPRET_DEOPTIMIZE@ -  - # Set to a flag for parallelizing make, e.g. -j2. It's given to make - # at the level where it's most effective. - MAKE_PARALLEL= -  - # Preprocessor flags. - PREFLAGS=-DPIKE_SRC_ROOT="$(BASEDIR)" -I. -I$(SRCDIR) $(DEFINES) - OTHERFLAGS=@CFLAGS@ $(OSFLAGS) $(OPTIMIZE) $(WARN) $(PROFIL) - NOOPTFLAGS=@CFLAGS@ @CPPFLAGS@ $(OSFLAGS) $(WARN) $(PROFIL) - CFLAGS=$(PREFLAGS) $(OTHERFLAGS) -  - SMARTLINK=@SMARTLINK@ - REALCC=@REALCC@ - CC=@CC@ - CXX=@CXX@ - CPP=@CPP@ - GDB=gdb -  - CANDLE=@CANDLE@ -nologo - LIGHT=@LIGHT@ -nologo - RCEXE=@RCEXE@ -  - FALLBACK_CC=@FALLBACK_CC@ -  - AR=@AR@ -  - LD=@LD@ - LINKFORSHARED=@LINKFORSHARED@ - LDFLAGS=@LDFLAGS@ $(LINKFORSHARED) $(EXTRALDFLAGS) - LDSHARED=@LDSHARED@ -  - DEFAULT_RUNPIKE=$(TMP_BUILDDIR)/pike -DNOT_INSTALLED -DPRECOMPILED_SEARCH_MORE -m$(TMP_BUILDDIR)/master.pike $(PIKEOPTS) - USE_TPIKE=$(TMP_BUILDDIR)/precompile.sh - USE_PIKE=pike $(PIKEOPTS) - RUNPIKE=$(@RUNPIKE@) - RUNTPIKE=$(@RUNTPIKE@) - PIKE_MODULE_RELOC=@PIKE_MODULE_RELOC@ -  - # Set to an appropriate invocation of valgrind (or similar) - VALGRIND=@VALGRIND@ - VALGRINDARGS=@VALGRINDARGS@ -  - MAKE_FLAGS= -  - # Add alloca.o if you don't have alloca() on your machine. - # - CORE_OBJ= \ -  language.o \ -  security.o \ -  bignum.o \ -  pike_cpulib.o \ -  interpret.o \ -  constants.o \ -  cpp.o \ -  fdlib.o \ -  cyclic.o \ -  array.o \ -  backend.o \ -  callback.o \ -  encode.o \ -  docode.o \ -  dynamic_buffer.o \ -  dynamic_load.o \ -  error.o \ -  fd_control.o \ -  fsort.o \ -  gc.o \ -  hashtable.o \ -  lex.o \ -  multiset.o \ -  signal_handler.o \ -  pike_search.o \ -  pike_types.o \ -  pike_embed.o \ -  mapping.o \ -  pike_memory.o \ -  module_support.o \ -  pikecode.o \ -  object.o \ -  opcodes.o \ -  operators.o \ -  pike_float.o \ -  port.o \ -  program.o \ -  rbtree.o \ -  rusage.o \ -  sprintf.o \ -  sscanf.o \ -  stralloc.o \ -  stuff.o \ -  threads.o \ -  version.o \ -  queue.o \ -  builtin.o \ -  iterators.o \ -  svalue.o \ -  las.o \ -  builtin_functions.o \ -  peep.o @DLOPEN_O@ @EXTRA_OBJS@ -  - OBJ=$(CORE_OBJ) @MODULE_O@ -  - MODULE_REQUIREMENTS= \ -  headerfiles-stamp \ -  machine.h \ -  global.h \ -  precompile.sh-stamp \ -  modules/static_module_makefile \ -  modules/dynamic_module_makefile \ -  post_modules/static_module_makefile \ -  post_modules/dynamic_module_makefile \ -  propagated_variables \ -  $(SRCDIR)/language.h \ -  $(SRCDIR)/interpret_protos.h \ -  lib @EXTRA_MODULE_REQUIREMENTS@ -  - SRC_TARGETS= \ -  $(SRCDIR)/language.c \ -  $(SRCDIR)/language.h \ -  $(SRCDIR)/interpret_protos.h \ -  $(SRCDIR)/interpret_functions_fixed.h \ -  $(SRCDIR)/peep_engine.c \ -  $(SRCDIR)/case_info.h \ -  $(SRCDIR)/whitespace.h \ -  $(SRCDIR)/treeopt.h @PMOD_TARGETS@ -  -  - # - # User callable targets - # -  - # Update the dumped modules, but only if dump_modules has been used earlier. - all: module_objects post_module_objects pike-complete-stamp -  @if [ -f dumpversion ]; then \ -  echo "$(MAKE) $(MAKE_FLAGS) dump_modules"; \ -  $(MAKE) $(MAKE_FLAGS) dump_modules; \ -  else :; fi -  @if [ "`find . -name '*.fail' -print`" = "" ]; then :; else \ -  echo; \ -  echo "Pike compiled and linked ok, but the following file(s) "; \ -  echo "failed to compile with full optimization.";\ -  echo "This may affect performance negatively."; \ -  find . -name '*.fail' -print | sed -e 's/\.fail$$//' -e 's/^/ /'; \ -  echo; \ -  fi -  - doc: documentation -  - documentation: onepage.xml traditional.xml modref.xml -  cd $(DOCDIR) && $(MAKE) $(MAKE_FLAGS) PIKE="$(RUNPIKE)" \ -  BUILDDIR="$(TMP_BUILDDIR)" $(DOCTARGET) -  - # Creation of include/. -  - headerfiles-stamp: include machine.h global.h $(SRC_TARGETS) force -  @$(MAKE) $(MAKE_FLAGS) headerfiles_low HEADERS="machine.h" HEADERSOURCE="`pwd`" -  @$(MAKE) $(MAKE_FLAGS) headerfiles_low HEADERS="`cd $(SRCDIR) && echo *.h`" HEADERSOURCE="$(SRCDIR)" -  @test -f headerfiles-stamp || echo foo > headerfiles-stamp -  - headerfiles_low: force -  @for f in $(HEADERS); do \ -  if [ -h "include/$$f" ]; then continue; fi; \ -  if cmp "$(HEADERSOURCE)/$$f" "include/$$f" >/dev/null 2>&1 ; then continue; fi; \ -  rm -f include/$$f 2>/dev/null; \ -  echo "Creating include/$$f"; \ -  if ln -s "$(HEADERSOURCE)/$$f" "include/$$f" && \ -  ls -L "include/$$f" >/dev/null 2>&1; then :; else \ -  echo "Symlink failed."; \ -  cp "$(HEADERSOURCE)/$$f" "include/$$f" || exit 1; \ -  fi; \ -  echo foo > headerfiles-stamp; \ -  done -  - include: include -  test -d include/. || mkdir include -  - compiler-warnings : clean -  @echo Summarizing compiler warnings. -  @echo -  @if $(MAKE) $(MAKE_FLAGS) all 2>compiler-warnings ; then \ -  echo; \ -  echo 'Compilation warning summary:'; \ -  echo '----------------------------'; \ -  else \ -  echo; \ -  echo 'Compilation warning and error summary:'; \ -  echo '--------------------------------------'; \ -  fi -  @echo -  @cat compiler-warnings -  @echo -  @echo 'End of summary' -  @echo '--------------' -  - # - # We assume that Pike.framework will be used as an embedded framework within an application bundle. - # if you want to install the framework in a standard location, like /Library/Frameworks, you will - # need to use install_name_tool to change the location. don't blame me, blame dyld. - # - # the following target assumes MacOS X 10.6 or higher, and is configured to use garbage collection - framework: OCPikeInterpreter.o $(OBJ) modules/linker_options @STATIC_POST_MODULES_LINKOPTS@ -  @echo "Linking Pike.framework";\ -  gcc -o Pike OCPikeInterpreter.o $(OBJ) `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` -framework Cocoa \ -  -dynamiclib -Wl,-no_pie -mpic-no-dynamic -Wl,-single_module \ -  -undefined dynamic_lookup -mmacosx-version-min=10.4 -current_version 7.9 -install_name @executable_path/../Frameworks/Pike.framework/Pike \ -  -isysroot /Developer/SDKs/MacOSX10.6.sdk -  ls -l Pike -  if test -x Pike.framework ; then rm -rf Pike.framework; fi -  mkdir Pike.framework -  mkdir Pike.framework/Versions -  mkdir Pike.framework/Versions/7.7 -  mkdir Pike.framework/Versions/7.7/Headers -  mkdir Pike.framework/Versions/7.7/Resources -  mkdir Pike.framework/Versions/7.7/Resources/lib -  mv Pike Pike.framework/Versions/7.7 -  cd Pike.framework/Versions && ln -s 7.7 Current -  cd Pike.framework && ln -s Versions/Current/Resources Resources && ln -s Versions/Current/Headers Headers && \ -  ln -s Versions/Current/Pike Pike -  cp $(SRCDIR)/*.h Pike.framework/Versions/7.7/Headers -  cp *.h Pike.framework/Versions/7.7/Headers -  cp $(PACKAGINGDIR)/macosx/framework_Info.plist Pike.framework/Versions/7.7/Resources/Info.plist -  MACHINE=`uname -m | tr " " "_"` && mkdir Pike.framework/Versions/7.7/Resources/$$MACHINE && cp -rf lib/* Pike.framework/Versions/7.7/Resources/$$MACHINE -  cp -rf $(SRCDIR)/../lib/* Pike.framework/Versions/7.7/Resources/lib -  cp master.pike Pike.framework/Versions/7.7/Resources/lib -  cd Pike.framework && find . -type f -name '*.in' -exec rm -f {} \; -  cd Pike.framework && find . -type d -name CVS -prune -exec rm -rf {} \; -  - libpike.so: $(OBJ) modules/linker_options @STATIC_POST_MODULES_LINKOPTS@ -  @echo "Linking libpike.so";\ -  if $(TMP_BINDIR)/smartlink "$(LDSHARED)" $(LDFLAGS) -o libpike.@SO@ \ -  $(OBJ) `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` \ -  $(LIBS); then \ -  if test "@SO@" != so ; then mv "module.@SO@" module.so ; \ -  else :; fi ;\ -  else \ -  echo "Linking failed:" >&2; \ -  echo $(TMP_BINDIR)/smartlink "$(LDSHARED)" $(LDFLAGS) -o libpike.@SO@ \ -  $(OBJ) `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` \ -  $(LIBS) >&2 ;\ -  exit 1; \ -  fi -  - # FIXME: Static linked version; this doesn't work yet! - # Since we need to split linker_options into archives and options. - libpike.a: $(OBJ) modules/linker_options @STATIC_POST_MODULES_LINKOPTS@ -  -rm -f libpike.a -  $(AR) cq libpike.a $(OBJ) -  -@RANLIB@ libpike.a -  - # tpike is only used when dynamic modules aren't. It's a pike with no - # post modules linked in which is used during building of the post - # modules. - tpike-real: main.o $(CORE_OBJ) tmodule.o modules/linker_options -  -@rm -f tpike tpike.exe -  $(LD) $(LDFLAGS) main.o $(CORE_OBJ) tmodule.o \ -  `cat modules/linker_options` \ -  $(LIBS) -o tpike@EXEEXT@ -  - # Only want tpike to exist for use with $(RUNPIKE) in the modules. We - # don't want to require it actually being up-to-date. - tpike@EXEEXT@: master-stamp -  $(MAKE) $(MAKE_FLAGS) $(MAKE_PARALLEL) tpike-real -  - # If we build without dynamic modules then tpike is built first with - # all modules under modules/ linked into it, then tpike is used for - # post_modules source targets, and then pike is linked with both - # modules/ and post_modules/. - # - # If we build with dynamic modules then pike is built first with the - # few always-static modules under modules/, then the dynamic modules - # under modules/ are built, then pike is used for post_modules source - # targets, and then all modules under post_modules/ are built - # dynamically. - # - # This means that a post_module can't be always-static and can't add - # stuff to the pike linkage using LINKER_OPTIONS. - # - # @LDSHARED_BASE_REQS@ expands to pike.lib if dynamic DLL modules are - # used on NT. - pike@EXEEXT@ pike.lib: main.o $(OBJ) master-stamp pike.syms modules/linker_options @STATIC_POST_MODULES_LINKOPTS@ @PIKE_ICON_RES@ -  -@if [ -f pike.old.exe ] ; then rm -f pike.old.exe || : ; else : ; fi -  -@if [ -f pike.old ] ; then rm -f pike.old || : ; else : ; fi -  -@if [ -f pike.exe ] ; then mv pike.exe pike.old.exe || : ; else : ; fi -  -@if [ -f pike ] ; then mv pike pike.old || : ; else : ; fi - # $(LD) $(LDFLAGS) main.o @DLOPEN_O@ -o pike@EXEXT@ -  $(LD) $(LDFLAGS) main.o $(OBJ) \ -  `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` \ -  $(LIBS) @PIKE_ICON_RES@ -o pike@EXEEXT@ -  @MT_FIX_PIKE_EXE@ - # The dumped modules are removed whenever Pike is relinked since some - # of the bytecode methods (e.g. ia32) store absolute addresses to - # global structs. That should probably be fixed in them so that dumped - # modules aren't link order dependent. -  @if [ -f dumpversion ]; then \ -  echo "$(MAKE) $(MAKE_FLAGS) delete_dumped_modules"; \ -  $(MAKE) $(MAKE_FLAGS) delete_dumped_modules; \ -  else :; fi -  - # gcov - gcov: -  @for f in `cd "$(SRCDIR)" && find . -type f -name '*.c' -print`; do \ -  if test -f `echo $$f | sed -e 's/\.$$/.bb/'`; then \ -  for gf in `gcov $$f | sed -e 's/Creating \(.*\)\.gcov.*/\1.gcov/p' -ed`; do \ -  echo "Generating $$f-$$gf."; \ -  test -f "$$f-$$gf" && rm -f "$$f-$$gf"; \ -  mv "$$gf" "$$f-$$gf"; \ -  done; \ -  else \ -  :; \ -  fi; \ -  done -  @echo -  @echo "Summary:" -  @for f in `find . -name '*.gcov' -print`; do \ -  grep '######' $$f | \ -  grep -v fatal | \ -  grep -v -i inline | \ -  grep -v PIKE_MODULE_EXIT | \ -  egrep -v '######[ ]*{$$' | \ -  egrep -v '######[ ]*}$$' | \ -  wc -l | sed -e "s|^|$$f:|" -e 's/:[ ]*/:/' | \ -  grep -v ':0'; \ -  done | sort -n -t: -k2 -  - # purify - pure: $(OBJ) master-stamp module_objects -  -@mv pike@EXEEXT@ pike.old@EXEEXT@ 2>/dev/null || true -  $(SMARTLINK) purify -max-threads=128 -thread_stack_change=8192 -free-queue-length=500 -inuse-at-exit=yes -chain-length=12 $(REALCC) $(LDFLAGS) $(OBJ) `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` $(LIBS) -o pike@EXEEXT@ -  - # purecov - cover: $(OBJ) master-stamp module_objects -  -@mv pike@EXEEXT@ pike.old@EXEEXT@ 2>/dev/null || true -  $(SMARTLINK) purecov purify -max-threads=128 -thread_stack_change=8192 -free-queue-length=500 -inuse-at-exit=yes -chain-length=12 $(REALCC) $(LDFLAGS) $(OBJ) `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` $(LIBS) -o pike@EXEEXT@ -  - # quantify - quant: $(OBJ) master-stamp module_objects -  -@mv pike@EXEEXT@ pike.old@EXEEXT@ 2>/dev/null || true -  $(SMARTLINK) quantify $(REALCC) $(LDFLAGS) $(OBJ) `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` $(LIBS) -o pike@EXEEXT@ -  - splint: -  splint $(PREFLAGS) -warnposix +charintliteral -realcompare -boolops -predboolint $(FILE) -  - atom: pike-complete-stamp -  atom pike -tool atom -env threads -g -v `find lib/modules -type f -name '*.so' -print | sed -e 's/^/-incobj /g'` -  mv pike pike.pre-atom -  mv pike.third.threads pike -  @echo Make sure you have '.' in your LD_LIBRARY_PATH. -  - pixie: pike-complete-stamp -  atom pike -tool pixie -env threads -g -v `find lib/modules -type f -name '*.so' -print | sed -e 's/^/-incobj /g'` -  mv pike pike.pre-pixie -  mv pike.pixie.threads pixie -  @echo Make sure you have '.' in your LD_LIBRARY_PATH. -  - dump_modules: pike-complete-stamp master-stamp -  -rm dumpmodule.log -  args="$(DUMPARGS)"; \ -  args=$${args:-"--log-file --update-only=dumpversion --report-failed"}; \ -  $(RUNPIKE) -x dump $$args \ -  --recursive --target-dir=lib "$(LIBDIR_SRC)/modules" -  - force_dump_modules: -  -rm dumpversion 2>/dev/null -  $(MAKE) $(MAKE_FLAGS) dump_modules -  - delete_dumped_modules: -  -find lib -type f -name \*.o | xargs rm -f -  - undump_modules: delete_dumped_modules -  -rm dumpversion 2>/dev/null -  - .SUFFIXES: - .SUFFIXES: .c .h .o .m .mmod .cmod .symlist .pp .pph .protos .h_src .wxs .wixobj .msi .msm -  - .c.pp: -  $(CPP) $(PREFLAGS) -DPMOD_EXPORT=PMOD_EXPORT \ -  -DPMOD_PROTO=PMOD_PROTO "$<" >"$@" -  - .c.protos: precompile.sh-stamp -  ./precompile.sh --cache fake_dynamic_load.pike >"$@" --cpp --protos \ -  $(CPP) $(PREFLAGS) -DPMOD_EXPORT=PMOD_EXPORT \ -  -DPMOD_PROTO=PMOD_PROTO -DPIKE_PRECOMPILER=1 "$<" || \ -  { rm "$@"; exit 1; } -  - .h.pph: -  $(CPP) $(PREFLAGS) -DPMOD_EXPORT=PMOD_EXPORT \ -  -DPMOD_PROTO=PMOD_PROTO "$<" >"$@" -  -  - # Several optimizers have problems with interpret.c - # First try compiling with optimization and if that doesn't work, without. - # GCC dumps core on some files @ OSF1 - # This kluge should work around that... - # Extra kludge added: interpret.o gets special flags (deoptimization) - .c.o: -  @echo "Compiling `echo '$<' | sed -e 's|^$(PIKE_SRC_DIR)/||'`" ; \ -  rm -f $@.fail >/dev/null 2>&1; \ -  if test "x$@" = "xinterpret.o"; then EXTRAFLAGS="$(INTERPRET_DEOPTIMIZE)"; else EXTRAFLAGS=; fi; \ -  if $(CC) $(CFLAGS) $$EXTRAFLAGS -c $< -o $@ ; then : ; else \ -  status=$$?; \ -  if test x"@noopt_retry@" = xyes ; then \ -  echo "WARNING: Compiler failure! Trying without optimization!" >&2;\ -  echo "$(CC) $(PREFLAGS) $(CFLAGS) $$EXTRAFLAGS -c $< -o $@" >$@.fail ;\ -  if NO_ULIMIT=yes $(CC) $(PREFLAGS) $(NOOPTFLAGS) $$EXTRAFLAGS -c $< -o $@ ; then : ; else \ -  status=$$?; \ -  echo "Compilation command was:" >&2;\ -  echo "$(CC) $(PREFLAGS) $(NOOPTFLAGS) $$EXTRAFLAGS -c $< -o $@" >&2 ;\ -  exit $$status; \ -  fi; \ -  else \ -  echo "Compilation command was:" >&2;\ -  echo "$(CC) $(PREFLAGS) $(CFLAGS) $$EXTRAFLAGS -c $< -o $@" >&2 ;\ -  exit $$status; \ -  fi; \ -  fi -  - .m.o: -  @echo "Compiling `echo '$<' | sed -e 's|^$(PIKE_SRC_DIR)/||'`" ; \ -  rm -f $@.fail >/dev/null 2>&1; \ -  if test "x$@" = "xinterpret.o"; then EXTRAFLAGS="$(INTERPRET_DEOPTIMIZE)"; else EXTRAFLAGS=; fi; \ -  if $(CC) $(CFLAGS) $$EXTRAFLAGS -fobjc-exceptions -fobjc-gc -c $< -o $@ ; then : ; else \ -  status=$$?; \ -  if test x"@noopt_retry@" = xyes ; then \ -  echo "WARNING: Compiler failure! Trying without optimization!" >&2;\ -  echo "$(CC) $(PREFLAGS) $(CFLAGS) $$EXTRAFLAGS -fobjc-exceptions -c $< -o $@" >$@.fail ;\ -  if NO_ULIMIT=yes $(CC) $(PREFLAGS) $(NOOPTFLAGS) $$EXTRAFLAGS -c $< -o $@ ; then : ; else \ -  status=$$?; \ -  echo "Compilation command was:" >&2;\ -  echo "$(CC) $(PREFLAGS) $(NOOPTFLAGS) $$EXTRAFLAGS -fobjc-exceptions -c $< -o $@" >&2 ;\ -  exit $$status; \ -  fi; \ -  else \ -  echo "Compilation command was:" >&2;\ -  echo "$(CC) $(PREFLAGS) $(CFLAGS) $$EXTRAFLAGS -fobjc-exceptions -c $< -o $@" >&2 ;\ -  exit $$status; \ -  fi; \ -  fi -  - # - # Please note that this must be accompanied by a dependency rule as - # The .c file will not be created in the SOURCE directory otherwise. - # -Hubbe - # - .cmod.c: precompile.sh-stamp $(TMP_BINDIR)/precompile.pike -  ./precompile.sh --cache precompile.pike $(PRECOMPILER_ARGS) >"$@" "$<" || { rm "$@"; exit 1; } -  - # The same applies to this. - .symlist.c: precompile.sh-stamp $(SRCDIR)/mklibpike.pike -  ./precompile.sh --cache $(SRCDIR)/mklibpike.pike -I. -I "$(SRCDIR)" -S "$<" -o "$@" || { rm "$@"; exit 1; } -  - # This rule is used for some header files that are generated from the - # source, to avoid excessive rebuilding when the source change in ways - # that doesn't affect the header. - # - # It can cause a .h target to be out-of-date repeatedly, but since it - # runs fast that's not an issue. This technique only works well in - # make's that stat the target again after the rule has run and - # recalculate the dependencies from that. Most make's seems to behave - # like that. - .h_src.h: -  @if test -f "$@"; then \ -  test -f "$@.nolines" || \ -  sed -e '/^[ \t]*$$/d;/^[ \t]*#[ \t]*line.*$$/d' < "$@" > "$@.nolines" && \ -  sed -e '/^[ \t]*$$/d;/^[ \t]*#[ \t]*line.*$$/d' < "$<" > "$<.nolines" && \ -  cmp -s "$<.nolines" "$@.nolines"; \ -  else \ -  false; \ -  fi || ( \ -  rm -f "$@.nolines" 2>/dev/null; \ -  echo "cp $< $@"; \ -  cp "$<" "$@"; \ -  ) -  - .wxs.wixobj: -  @if test -f "$@"; then rm -f "$@"; else :; fi # Paranoia -  $(CANDLE) "$<" -out "$@" || { rm -f "$@"; exit 1; } -  - .wixobj.msm: -  @test -d cab_cache || mkdir cab_cache -  @if test -f "$@"; then rm -f "$@"; else :; fi # Paranoia -  $(LIGHT) "$<" -cc cab_cache -o "$@" || { rm -f "$@"; exit 1; } -  - .wixobj.msi: -  @test -d cab_cache || mkdir cab_cache -  @if test -f "$@"; then rm -f "$@"; else :; fi # Paranoia -  $(LIGHT) "$<" -cc cab_cache -o "$@" || { rm -f "$@"; exit 1; } -  - Pike_banner.bmp: $(SRCDIR)/make_banner.pike $(SRCDIR)/../refdoc/src_images/pike_logo.gif -  $(RUNPIKE) $(SRCDIR)/make_banner.pike $(SRCDIR)/../refdoc/src_images/pike_logo.gif >Pike_banner.bmp || rm Pike_banner.bmp -  - UpFldrBtn.ibd: $(PACKAGINGDIR)/windows/UpFldrBtn.ibd -  cp "$<" "$@" -  - NewFldrBtn.ibd: $(PACKAGINGDIR)/windows/NewFldrBtn.ibd -  cp "$<" "$@" -  - PikeWin32Installer.vbs: $(PACKAGINGDIR)/windows/installer.vbs -  @if [ -f "$@" ] && cmp "$<" "$@" >/dev/null; then \ -  echo "PikeWin32Installer.vbs is up to date."; \ -  else \ -  echo cp '"'"$<"'"' '"'"$@"'"'; \ -  cp "$<" "$@"; \ -  fi -  - Pike_module.msm: PikeWin32Installer.vbs -  - Pike_module.wxs: pike-complete-stamp $(TMP_BINDIR)/install.pike Makefile -  @no_autodoc="--no-autodoc"; \ -  if [ -f autodoc.xml ]; then no_autodoc=""; fi; \ -  $(RUNPIKE) $(TMP_BINDIR)/install.pike --wix-module $$no_autodoc \ -  @INSTALL_EXPORT_ARGS@ \ -  exec_prefix="$(bindir)" lib_prefix="$(lib_prefix)" \ -  TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \ -  SRCDIR="$(SRCDIR)" prefix="$(prefix)" DOCDIR_SRC="$(DOCDIR_SRC)" \ -  MANDIR_SRC="$(MANDIR_SRC)" \ -  BASEDIR="$(BASEDIR)" man_prefix="$(man_prefix)" \ -  cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \ -  pike_name=$(pike_name) PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)" -  - Pike.wxs: $(TMP_BINDIR)/install.pike Makefile -  @no_autodoc="--no-autodoc"; \ -  if [ -f autodoc.xml ]; then no_autodoc=""; fi; \ -  $(RUNPIKE) $(TMP_BINDIR)/install.pike --wix $$no_autodoc \ -  @INSTALL_EXPORT_ARGS@ \ -  exec_prefix="$(bindir)" lib_prefix="$(lib_prefix)" \ -  TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \ -  SRCDIR="$(SRCDIR)" prefix="$(prefix)" DOCDIR_SRC="$(DOCDIR_SRC)" \ -  MANDIR_SRC="$(MANDIR_SRC)" \ -  BASEDIR="$(BASEDIR)" man_prefix="$(man_prefix)" \ -  cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \ -  pike_name=$(pike_name) PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)" -  - Pike.msi: Pike.wixobj Pike_ui.wixobj Pike_module.msm Pike_banner.bmp UpFldrBtn.ibd NewFldrBtn.ibd -  @test -d cab_cache || mkdir cab_cache -  @if test -f Pike.msi; then rm Pike.msi; else :; fi # Paranoia -  $(LIGHT) Pike.wixobj Pike_ui.wixobj -o Pike.msi -cc cab_cache -  - wix: Pike.msi -  - wix_export: Pike.msi -  VER=`$(RUNPIKE) --dumpversion` ;\ -  cp Pike.msi $(BASEDIR)/Pike-v$(VER)-win32.msi ;\ -  cp config.info $(BASEDIR)/Pike-v$(VER)-win32.info -  - force : -  @: -  - pike.ico: $(PACKAGINGDIR)/windows/pike.ico -  cp "$<" $@ -  - pike_icon.res: pike.ico -  echo 'pike ICON pike.ico' > pike_icon.rc -  $(RCEXE) /fo $@ pike_icon.rc -  - # install - install: pike-complete-stamp -  @$(RUNPIKE) $(TMP_BINDIR)/install.pike \ -  exec_prefix="$(bindir)" lib_prefix="$(lib_prefix)" \ -  include_prefix="$(include_prefix)" \ -  TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \ -  SRCDIR="$(SRCDIR)" prefix="$(prefix)" DOCDIR_SRC="$(DOCDIR_SRC)" \ -  MANDIR_SRC="$(MANDIR_SRC)" \ -  man_prefix="$(man_prefix)" pike_name=$(pike_name) \ -  fakeroot="$(buildroot)" PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)" \ -  cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \ -  $(INSTALLARGS) -  - install_interactive: pike-complete-stamp -  @$(RUNPIKE) $(TMP_BINDIR)/install.pike --interactive \ -  exec_prefix="$(bindir)" prefix=$(prefix) \ -  TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \ -  SRCDIR="$(SRCDIR)" DOCDIR_SRC="$(DOCDIR_SRC)" \ -  MANDIR_SRC="$(MANDIR_SRC)" \ -  cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \ -  fakeroot="$(buildroot)" PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)" -  - # tidy up a bit - tidy: -  -rm -f a.out a.out.* *.fail *.pp *.protos core y.output y.tab.c y.tab.h -  -rm -f core core.* *.o *.obj *.i *.i~ dynloadtest* cfl.* -  -rm -f conftest.* hdrlist.h a.out.exe -  -rm testsuite testsuite.tmp testsuite_test.pike testsuite_test_dir.pmod -  -rm -f *.wixobj *.wxs Pike_banner.bmp UpFldrBtn.ibd NewFldrBtn.ibd PikeWin32Installer.vbs -  -rm -f pike.ico pike_icon.rc pike_icon.res -  -find lib -type f -name \*.o -o -name \*.obj | xargs rm -f -  - # make clean - clean_here: tidy doc_clean -  -( cd tlib; find . -name testsuite | xargs rm ) -  -( cd extra_tests; find . -name testsuite | xargs rm ) -  -rm -f confdefs.h -  -rm -rf test-install test-pike tpike tpike.* *.pdb -  -rm -f TAGS tags yacc.acts yacc.debug yacc.tmp *.debug.log a.out pike.tmp -  -rm -f master.pike compiler-warnings dumpmodule.log -  -rm -f interpreter_debug.h lexer?.h -  -rm -f import-stamp master-stamp headerfiles-stamp -  -rm -f static-modules-stamp dynamic-modules-stamp post-modules-stamp -  -rm -f post-module-pike-stamp pike-complete-stamp -  -rm -rf lib/modules/* - # -rm -f lib/master.pike -  - clean: clean_here -  -( cd modules; $(MAKE) $(MAKE_FLAGS) clean ) -  -( cd post_modules; $(MAKE) $(MAKE_FLAGS) clean ) -  - clean_pike: -  -rm -f pike pike.lib pike.exe pike.exe.manifest pike.exp -  - # Clean up everything that needs to go if the configure args change. - config_change_clean: clean clean_pike -  - # make _really_ clean - spotless: clean_here clean_pike -  -( cd modules; $(MAKE) $(MAKE_FLAGS) spotless ) -  -( cd post_modules; $(MAKE) $(MAKE_FLAGS) spotless ) -  -(cd $(SRCDIR); find . -type f -name '*.h.in' -print) | \ -  sed -e 's/\.in$$//' | xargs rm -f -  -rm -f Makefile config.* make_variables specs pike.syms -  -rm -f .pure stamp-h -  -rm -f lexical.c mon.out *.ln -  -rm -f pike pike.exe pike.old pike.old.exe l.outa* num_files_to_install -  -rm -f *.msm *.msi -  -rm -f precompile.sh precompile.sh-stamp smartlink -  -rm -rf tlib extra_tests lib precompile -  - distclean: spotless -  - # FIXME: Use .gitignore instead. - gitclean: distclean -  ( for d in `cd $(SRCDIR) && find . -type d -print`; do \ -  if test -f "$(SRCDIR)/$$d/.cvsignore" ; then \ -  (cd "$$d" && rm -f `cat "$(SRCDIR)/$$d/.cvsignore"`); \ -  (cd "$(SRCDIR)/$$d" && rm -f `cat "$(SRCDIR)/$$d/.cvsignore"`); \ -  else :; fi; \ -  done) -  - cvsclean: gitclean -  - # create tags - tags: -  ctags *.c -  - TAGS: -  etags -t *.h *.c -  - # verify / debug - testsuites: -  $(MAKE) $(MAKE_FLAGS) testsuite -  ( cd modules && $(MAKE) $(MAKE_FLAGS) testsuites ) -  ( cd post_modules && $(MAKE) $(MAKE_FLAGS) testsuites ) -  ( cd $(TMP_BUILDDIR) && $(TMP_BINDIR)/mklibtests.sh \ -  --srcdir=$(LIBDIR_SRC) \ -  --destdir=tlib --bindir=$(TMP_BINDIR) ) -  if test -d "$(BASEDIR)/extra_tests" ; then \ -  (cd "$(TMP_BUILDDIR)" && $(TMP_BINDIR)/mklibtests.sh \ -  --srcdir="$(BASEDIR)/extra_tests" \ -  --destdir=extra_tests --bindir=$(TMP_BINDIR) ) ; fi; -  - just_verify: testsuites master-stamp -  if test "x$(TESTARGS)" = x ; then args="-F -a -v" ; \ -  else args="$(TESTARGS)" ; fi; \ -  $(RUNPIKE) -x test_pike $$args -  - valgrind_just_verify: testsuites master-stamp -  if test "x$(TESTARGS)" = x ; then args="-a -v" ; \ -  else args="$(TESTARGS)" ; fi; \ -  $(VALGRIND) $(VALGRINDARGS) $(RUNPIKE) -x test_pike --subproc-start="$(VALGRIND) $(VALGRINDARGS)" $$args -  - dtrace_probes.h: $(SRCDIR)/dtrace/dtrace_probes.d -  dtrace -h -s "$(SRCDIR)/dtrace/dtrace_probes.d" -o "$(TMP_BUILDDIR)/dtrace_probes.h" -  -  - # Testsuite for dynamic loading debugging - test_dlopen: dynloadtest.sh -  sh ./dynloadtest.sh -  - dynloadtest.sh: $(SRCDIR)/test_dynamic_loading.in -  m4 "$(SRCDIR)/test_dynamic_loading.in" >"$@" -  - dynloadtest.c: dynamic_load.c -  - dynloadtest@EXEEXT@: dynloadtest.o @EXTRA_OBJS@ fdlib.o port.o -  $(LD) $(LDFLAGS) dynloadtest.o @EXTRA_OBJS@ fdlib.o port.o $(LIBS) -o $@ -  -  - tinstall: master-stamp -  -rm -rf test-install -  $(RUNPIKE) $(TMP_BINDIR)/install.pike \ -  `test -f autodoc.xml || echo --no-autodoc` \ -  lib_prefix="$(lib_prefix)" \ -  TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \ -  SRCDIR="$(SRCDIR)" DOCDIR_SRC="$(DOCDIR_SRC)" \ -  MANDIR_SRC="$(MANDIR_SRC)" \ -  man_prefix="$(man_prefix)" fakeroot="$(buildroot)" \ -  PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)" pike_name="test-pike" \ -  cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \ -  prefix="./test-install" $(INSTALLARGS) -  - just-tinstall: master-stamp -  $(RUNPIKE) $(TMP_BINDIR)/install.pike \ -  `test -f autodoc.xml || echo --no-autodoc` \ -  lib_prefix="$(lib_prefix)" \ -  TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \ -  SRCDIR="$(SRCDIR)" DOCDIR_SRC="$(DOCDIR_SRC)" \ -  MANDIR_SRC="$(MANDIR_SRC)" \ -  man_prefix="$(man_prefix)" fakeroot="$(buildroot)" \ -  PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)" pike_name="test-pike" \ -  cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \ -  prefix="./test-install" $(INSTALLARGS) -  -  - verify: testsuites tinstall -  PIKE_MODULE_PATH=""; PIKE_INCLUDE_PATH=""; \ -  if test "$(TESTARGS)" = "" ; then args="-F -a -v" ; else \ -  args="$(TESTARGS)" ; fi; \ -  if test -f ./test-pike ; then \ -  ./test-pike -DNOT_INSTALLED $(PIKEOPTS) -x test_pike $$args ; \ -  else \ -  if test -f some-sprsh-test ; then \ -  sprsh `pwd`/test-install/pike/*/bin/pike.exe -DNOT_INSTALLED $(PIKEOPTS) -x test_pike $$args ; \ -  else \ -  `pwd`/test-install/pike/*/bin/pike.exe -DNOT_INSTALLED $(PIKEOPTS) -x test_pike $$args ; \ -  fi \ -  fi -  - valgrind_verify: testsuites tinstall -  PIKE_MODULE_PATH=""; PIKE_INCLUDE_PATH=""; \ -  if test "$(TESTARGS)" = "" ; then args="-a -v" ; else \ -  args="$(TESTARGS)" ; fi; \ -  if test -f ./test-pike ; then \ -  $(VALGRIND) $(VALGRINDARGS) ./test-pike -DNOT_INSTALLED $(PIKEOPTS) -x test_pike --subproc-start="$(VALGRIND) $(VALGRINDARGS)" $$args ; \ -  else \ -  sprsh `pwd`/test-install/pike/*/bin/pike.exe -DNOT_INSTALLED $(PIKEOPTS) -x test_pike $$args ; \ -  fi -  - bench: tinstall -  if test -f ./test-pike ; then \ -  ./test-pike -DNOT_INSTALLED $(PIKEOPTS) -x benchmark; \ -  else \ -  if test -f some-sprsh-test ; then \ -  sprsh `pwd`/test-install/pike/*/bin/pike.exe -DNOT_INSTALLED $(PIKEOPTS) -x benchmark ; \ -  else \ -  `pwd`/test-install/pike/*/bin/pike.exe -DNOT_INSTALLED $(PIKEOPTS) -x benchmark ; \ -  fi \ -  fi -  - verify_installed: testsuites master-stamp -  if test "$(TESTARGS)" = "" ; then args="-F -a -v" ; else \ -  args="$(TESTARGS)" ; fi; \ -  $(bindir)/pike $(PIKEOPTS) -x test_pike $$args -  - check: verify -  - sure: verify -  - # verify / debug verbose - verbose_verify: testsuites master-stamp -  if test "$(TESTARGS)" = "" ; then args="-F -a" ; else args="$(TESTARGS)" ; fi; \ -  $(RUNPIKE) -x test_pike -v -v $$args -  - # verify & debug VERBOSE - gdb_verify: testsuites master-stamp -  @echo >.gdbinit handle SIGFPE nostop noprint pass -  @echo >>.gdbinit handle SIGUSR1 nostop noprint pass -  @echo >>.gdbinit handle SIGUSR2 nostop noprint pass -  @echo >>.gdbinit handle SIGLWP nostop noprint pass -  @if kill -l | grep SIGRTMIN >/dev/null ; then \ -  echo >>.gdbinit handle SIG32 nostop noprint pass ;\ -  else :; fi -  @echo >>.gdbinit break debug_fatal -  @echo >>.gdbinit break pike_gdb_breakpoint -  @if test "$(TESTARGS)" = "" ; then args="-a -v -v" ; else \ -  args="$(TESTARGS)" ; fi; \ -  echo >>.gdbinit set args \ -  -m`echo "$(TMP_BUILDDIR)/master.pike" | ./posix_to_native.sh` \ -  $(PIKEOPTS) -x test_pike --no-watchdog $$args -  $(GDB) $(TMP_BUILDDIR)/pike -  @rm .gdbinit -  - gdb_hilfe: master.pike -  @echo >.gdbinit handle SIGFPE nostop noprint pass -  @echo >>.gdbinit handle SIGUSR1 nostop noprint pass -  @echo >>.gdbinit handle SIGUSR2 nostop noprint pass -  @echo >>.gdbinit handle SIGLWP nostop noprint pass -  @if kill -l | grep SIGRTMIN >/dev/null ; then \ -  echo >>.gdbinit handle SIG32 nostop noprint pass ;\ -  else :; fi -  @echo >>.gdbinit break debug_fatal -  @echo >>.gdbinit break pike_gdb_breakpoint -  @echo >>.gdbinit set args -m$(TMP_BUILDDIR)/master.pike $$ARGS -  $(GDB) $(TMP_BUILDDIR)/pike -  @rm .gdbinit -  - # fast test - fast_verify_testsuite: testsuite -  PIKE_MODULE_PATH=""; PIKE_INCLUDE_PATH=""; \ -  if test "$(TESTARGS)" = "" ; then args="-F -a" ; \ -  else args="$(TESTARGS)" ; fi; \ -  if test -f ./test-pike ; then \ -  ./test-pike -DNOT_INSTALLED $(PIKEOPTS) -x test_pike $$args ; \ -  else \ -  sprsh `pwd`/test-install/pike/*/bin/pike.exe -DNOT_INSTALLED \ -  $(PIKEOPTS) -x test_pike $$args ; \ -  fi -  - # run hilfe, for interactive testing - run_hilfe: master.pike -  $(RUNPIKE) $(ARGS) -  - valgrind_hilfe: master.pike -  $(VALGRIND) $(VALGRINDARGS) $(RUNPIKE) $(ARGS) -  - feature_list: -  $(RUNPIKE) --features -  - run_bench: -  $(RUNPIKE) $(ARGS) -x benchmark $(BENCHARGS) -  - lib: Makefile -  @for d in lib lib/modules lib/include; do \ -  if [ -d $$d/. ]; then : ; else \ -  echo "Creating $$d/."; \ -  (mkdir $$d && chmod u+rwx $$d) || exit 1; \ -  fi ; \ -  done -  @echo "Done." -  -@touch ./lib 2>/dev/null || (touch lib/.broken_gnu_touch && rm lib/.broken_gnu_touch) -  - $(SRCDIR)/type_checker.c: type_checker-stamp - $(SRCDIR)/type_checker.h: type_checker-stamp - type_checker-stamp: $(SRCDIR)/type_checker.in $(SRCDIR)/make_type_checker.pike -  $(RUNPIKE) $(SRCDIR)/make_type_checker.pike "$<" && touch "$@" -  - master.pike: $(LIBDIR_SRC)/master.pike.in Makefile -  @if test "x$(PIKE_MODULE_RELOC)" = "x"; \ -  then u=s,x,x,; \ -  else u='s/^#undef PIKE_MODULE_RELOC/#define PIKE_MODULE_RELOC 1/'; \ -  fi; \ -  LC_ALL=C; export LC_ALL; \ -  cmd="sed -e 's!#lib_prefix#!`echo '$(TMP_LIBDIR)' | ./posix_to_native.sh`!' \ -  -e 's!#share_prefix#!`echo '$(LIBDIR_SRC)' | ./posix_to_native.sh`!' \ -  -e 's!#include_prefix#!`echo '$(TMP_BUILDDIR)/include' | ./posix_to_native.sh`!' \ -  -e '$$u'"; \ -  echo "$$cmd <$(LIBDIR_SRC)/master.pike.in >master.pike"; \ -  eval $$cmd <$(LIBDIR_SRC)/master.pike.in >master.pike || { rm "master.pike"; exit 1; } -  - # Want master.pike up-to-date, but yet there's no dependency on the - # that file. Works like the .h_src.h target. - master-stamp: master.pike -  @test -f master-stamp || echo foo > master-stamp -  - # - # Documentation related stuff. - # -  - onepage.xml: autodoc.xml $(DOCDIR)/structure/onepage.xml -  (cd "$(DOCDIR)" && \ -  $(RUNPIKE) -x assemble_autodoc structure/onepage.xml \ -  $(TMP_BUILDDIR)/autodoc.xml) >onepage.xml || { rm "$@"; exit 1; } -  - traditional.xml: autodoc.xml $(DOCDIR)/structure/traditional.xml -  ( cd "$(DOCDIR)" && \ -  $(RUNPIKE) -x assemble_autodoc structure/traditional.xml \ -  $(TMP_BUILDDIR)/autodoc.xml) >traditional.xml || { rm "$@"; exit 1; } -  - modref.xml: autodoc.xml $(DOCDIR)/structure/modref.xml -  (cd "$(DOCDIR)" && \ -  $(RUNPIKE) -x assemble_autodoc structure/modref.xml \ -  $(TMP_BUILDDIR)/autodoc.xml) >modref.xml || { rm "$@"; exit 1; } -  - autodoc.xml: pike-complete-stamp doc_build/src doc_build/lib doc_build/images images1 images2 force -  $(RUNPIKE) -x extract_autodoc -q --srcdir=$(SRCDIR) \ -  --imgsrc=$(DOCDIR)/src_images --builddir=doc_build/src \ -  --imgdir=doc_build/images -  $(RUNPIKE) -x extract_autodoc -q --srcdir=$(LIBDIR_SRC) \ -  --imgsrc=$(DOCDIR)/src_images --builddir=doc_build/lib \ -  --imgdir=doc_build/images -  $(RUNPIKE) -x join_autodoc --quiet --post-process autodoc.xml doc_build -  - autodoc-stamp: -  @test -f autodoc.xml || $(MAKE) autodoc.xml -  @test -f autodoc-stamp || echo foo > autodoc-stamp -  - images1: doc_build/src/post_modules/GTK1/refdoc/images -  @cp $(SRCDIR)/post_modules/GTK1/refdoc/images/*.png \ -  doc_build/src/post_modules/GTK1/refdoc/images/ -  - images2: doc_build/src/post_modules/GTK2/refdoc/images -  @cp $(SRCDIR)/post_modules/GTK2/refdoc/images/*.png \ -  doc_build/src/post_modules/GTK2/refdoc/images/ -  - # Directories -  - doc_build: -  @test -d doc_build || mkdir doc_build -  - doc_build/src: doc_build -  @test -d doc_build/src || mkdir doc_build/src -  - doc_build/lib: doc_build -  @test -d doc_build/lib || mkdir doc_build/lib -  - doc_build/images: doc_build -  @test -d doc_build/images || mkdir doc_build/images -  - doc_build/src/post_modules: doc_build/src -  @test -d doc_build/src/post_modules || \ -  mkdir doc_build/src/post_modules -  - doc_build/src/post_modules/GTK1/refdoc/images: doc_build/src/post_modules -  @test -d doc_build/src/post_modules/GTK1 || \ -  mkdir doc_build/src/post_modules/GTK1 -  @test -d doc_build/src/post_modules/GTK1/refdoc || \ -  mkdir doc_build/src/post_modules/GTK1/refdoc -  @test -d doc_build/src/post_modules/GTK1/refdoc/images || \ -  mkdir doc_build/src/post_modules/GTK1/refdoc/images -  - doc_build/src/post_modules/GTK2/refdoc/images: doc_build/src/post_modules -  @test -d doc_build/src/post_modules/GTK2 || \ -  mkdir doc_build/src/post_modules/GTK2 -  @test -d doc_build/src/post_modules/GTK2/refdoc || \ -  mkdir doc_build/src/post_modules/GTK2/refdoc -  @test -d doc_build/src/post_modules/GTK2/refdoc/images || \ -  mkdir doc_build/src/post_modules/GTK2/refdoc/images -  - doc_clean: -  -rm -f onepage.xml traditional.xml modref.xml autodoc.xml resolution.log -  -rm -rf doc_build -  -  - pike.syms: $(SRCDIR)/interpret.c $(SRCDIR)/interpreter.h $(SRCDIR)/program.c $(SRCDIR)/builtin_functions.c -  ( cat $(SRCDIR)/*.h *.h | egrep '^[ ]*#[ ]*define[ ][ ]*[a-zA-Z_0-9]*[ ][ ]*[0-9][xabcdefABCDEF0-9]*[ ]*' ; \ -  echo "#define" `$(CPP) $(PREFLAGS) -DSTEP_BREAK_LINE='STEP_BREAK_LINE __LINE__' $(SRCDIR)/interpreter.h | grep STEP_BREAK_LINE` ) >pike.syms -  - # We touch the files that depend on language.h_src and - # interpret_protos.h_src to ensure that the .h_src.h rule doesn't have - # anything to do in the dist. - source: depend -  if test -f $(SRCDIR)/language.c; then touch $(SRCDIR)/language.c; else :; fi -  if test -f $(SRCDIR)/language.h; then touch $(SRCDIR)/language.h; else :; fi -  if test -f $(SRCDIR)/interpret_protos.h; then touch $(SRCDIR)/interpret_protos.h; else :; fi -  - # make export archive (requires compiled Pike) - # Do not compile in source tree if you want to use this! - # Beware that export archive this includes bison/yacc/byacc source - # and thus has to follow the rules stated in that code. -  - full_export: source -  chmod +x $(SRCDIR)/install-sh -  $(RUNPIKE) $(TMP_BINDIR)/export.pike --srcdir="$(SRCDIR)" \ -  --exportlist="$(SRCDIR)/export_list" --name=Pike-v%maj.%min.%bld \ -  --tag $(EXPORTARGS) -  - EXPORT_NAME=Pike-v%maj.%min-%Y%M%D - snapshot_export: source -  chmod +x $(SRCDIR)/install-sh -  $(RUNPIKE) $(TMP_BINDIR)/export.pike --srcdir="$(SRCDIR)" \ -  --exportlist="$(SRCDIR)/export_list" --name=$(EXPORT_NAME) \ -  $(EXPORTARGS) -  - export: full_export -  - bin_export: -  @rm -f *.burk -  @no_autodoc="--no-autodoc"; \ -  if [ -f autodoc.xml ]; then no_autodoc=""; fi; \ -  $(RUNPIKE) $(TMP_BINDIR)/install.pike --export $$no_autodoc \ -  @INSTALL_EXPORT_ARGS@ \ -  exec_prefix="$(bindir)" lib_prefix="$(lib_prefix)" \ -  TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \ -  SRCDIR="$(SRCDIR)" prefix="$(prefix)" DOCDIR_SRC="$(DOCDIR_SRC)" \ -  MANDIR_SRC="$(MANDIR_SRC)" \ -  BASEDIR="$(BASEDIR)" man_prefix="$(man_prefix)" \ -  cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \ -  pike_name=$(pike_name) PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)" -  @case " $(CC)" in \ -  *\ rnt*) \ -  $(MAKE) $(MAKE_FLAGS) uncompress_header ;\ -  echo "Compressing..." ;\ -  filename=`echo *.burk | sed 's@\.burk$$@@g'`.exe ;\ -  ( cat uncompress_header.exe ; gzip -9 -c *.burk ) > $$filename ;\ -  echo "Done." ;\ -  ;; \ -  esac -  - #new_peep_engine: - # $(RUNTPIKE) $(TMP_BINDIR)/mkpeep.pike $(SRCDIR)/peep.in >$(SRCDIR)/peep_engine.c - # $(RUNTPIKE) $(TMP_BINDIR)/make_ci.pike <$(SRCDIR)/UnicodeData.txt >$(SRCDIR)/case_info.h -  - $(SRCDIR)/peep_engine.c: $(SRCDIR)/peep.in $(TMP_BINDIR)/mkpeep.pike -  ./precompile.sh $(TMP_BINDIR)/mkpeep.pike $(SRCDIR)/peep.in >$(SRCDIR)/peep_engine.c || ( rm $(SRCDIR)/peep_engine.c ; exit 1 ) -  - peep.o: $(SRCDIR)/peep_engine.c -  - $(SRCDIR)/whitespace.h: $(SRCDIR)/UnicodeData.txt $(TMP_BINDIR)/getwhitespace.sh -  $(TMP_BINDIR)/getwhitespace.sh >$(SRCDIR)/whitespace.h \ -  <$(SRCDIR)/UnicodeData.txt -  - $(SRCDIR)/case_info.h: $(SRCDIR)/UnicodeData.txt $(TMP_BINDIR)/make_ci.pike -  ./precompile.sh $(TMP_BINDIR)/make_ci.pike $(SRCDIR)/case_info.h \ -  <$(SRCDIR)/UnicodeData.txt -  - builtin_functions.o: $(SRCDIR)/case_info.h $(SRCDIR)/combine_path.h -  - $(SRCDIR)/treeopt.h: $(SRCDIR)/treeopt.in $(TMP_BINDIR)/mktreeopt.pike -  ./precompile.sh $(TMP_BINDIR)/mktreeopt.pike $(SRCDIR)/treeopt.in || ( rm $(SRCDIR)/treeopt.h ; exit 1 ) -  - las.o: $(SRCDIR)/treeopt.h -  - # This dependency is here to make sure that lexer[012].h are generated. - # The reason for the split is that some compilers (read cl) generate - # better code then. Strange, but true. - lex.o: lexer0.h lexer1.h lexer2.h -  - lex.protos: lexer0.h lexer1.h lexer2.h -  - lexer0.h: lexer.h -  cp "$(SRCDIR)/lexer.h" "$@" -  - lexer1.h: lexer.h -  cp "$(SRCDIR)/lexer.h" "$@" -  - lexer2.h: lexer.h -  cp "$(SRCDIR)/lexer.h" "$@" -  -  - # unbug needs interpreter_nd.h to be able to - # set separate breakpoints in eval_instruction_with/without_debug - interpreter_debug.h: interpreter.h -  cp "$(SRCDIR)/interpreter.h" "$@" -  - interpret.o: interpreter_debug.h $(SRCDIR)/interpret_functions_fixed.h -  - # make dependencies - depend: $(SRC_TARGETS) -  gcc -MM -MG $(PREFLAGS) $(SRCDIR)/*.c | $(TMP_BINDIR)/fixdepends.sh "$(SRCDIR)" "$(SRCDIR)" /dev/null -  -@(while :; do \ -  echo foo > cfl.$@; test "`echo cfl.*`" = cfl.$@ && break; \ -  rm cfl.$@; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \ -  arb=37; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \ -  done;) -  CONFIG_FILES=Makefile CONFIG_HEADERS="" ./config.status || \ -  (EXITCODE=$$?; rm cfl.$@; exit $$EXITCODE) -  -@rm cfl.$@ -  @( cd modules && { \ -  rm -f remake; \ -  $(MAKE) $(MAKE_FLAGS) depend || \ -  { test -f remake && $(MAKE) $(MAKE_FLAGS) depend; }; \ -  }) -  @if [ "x$(RUNPIKE)" != "x$(DEFAULT_RUNPIKE)" -o -x $(TMP_BUILDDIR)/pike ]; then \ -  $(MAKE) $(MAKE_FLAGS) post_modules_depend; \ -  else \ -  echo "Skipping make depend in post_modules since a fresh pike is"; \ -  echo "needed to make the autogenerated sources there."; \ -  :; \ -  fi -  - post_modules_depend: -  @if [ "x$(RUNPIKE)" != "x$(DEFAULT_RUNPIKE)" -o -x $(TMP_BUILDDIR)/pike ]; then :; \ -  else $(MAKE) $(MAKE_FLAGS) $(MAKE_PARALLEL) pike@EXEEXT@; fi -  @( cd post_modules && { \ -  rm -f remake; \ -  $(MAKE) $(MAKE_FLAGS) depend || \ -  { test -f remake && $(MAKE) $(MAKE_FLAGS) depend; }; \ -  }) -  - # - # Pike internal targets - # -  - # touch static-modules-stamp here to avoid doing this work again if - # that target is checked later. - static_module_objects: $(MODULE_REQUIREMENTS) -  @MODULE_BUILD_TYPE=static; \ -  export MODULE_BUILD_TYPE; \ -  ( cd modules && ( rm remake >/dev/null 2>&1 || : ) && \ -  ( $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) || \ -  ( test -f remake && $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) ) ) \ -  ) || exit $$? -  @touch static-modules-stamp -  - static-modules-stamp: $(MODULE_REQUIREMENTS) -  @MODULE_BUILD_TYPE=static; \ -  export MODULE_BUILD_TYPE; \ -  ( cd modules && ( rm remake >/dev/null 2>&1 || : ) && \ -  ( $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) || \ -  ( test -f remake && $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) ) ) \ -  ) || exit $$? -  @touch static-modules-stamp -  - dynamic_module_objects: $(MODULE_REQUIREMENTS) @LDSHARED_BASE_REQS@ -  @MODULE_BUILD_TYPE=dynamic; \ -  export MODULE_BUILD_TYPE; \ -  ( cd modules && ( rm remake >/dev/null 2>&1 || : ) && \ -  ( $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) || \ -  ( test -f remake && $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) ) ) \ -  ) || exit $$? -  @touch dynamic-modules-stamp -  - dynamic-modules-stamp: $(MODULE_REQUIREMENTS) @LDSHARED_BASE_REQS@ -  @MODULE_BUILD_TYPE=dynamic; \ -  export MODULE_BUILD_TYPE; \ -  ( cd modules && ( rm remake >/dev/null 2>&1 || : ) && \ -  ( $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) || \ -  ( test -f remake && $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) ) ) \ -  ) || exit $$? -  @touch dynamic-modules-stamp -  - # Use submakes here to ensure both correct sequencing and that all - # modules are properly rechecked. - module_objects: -  @$(MAKE) $(MAKE_FLAGS) static_module_objects -  @$(MAKE) $(MAKE_FLAGS) dynamic_module_objects -  - modules/modlist.h: static-modules-stamp -  - modules/modlist_headers.h: static-modules-stamp -  - modules/linker_options: static-modules-stamp -  - post-module-pike-stamp: @BUILD_PIKE@ dynamic-modules-stamp -  @touch post-module-pike-stamp -  - module.o: modules/modlist_headers.h modules/modlist.h post_modules/modlist_headers.h post_modules/modlist.h -  - tmodule.o: modules/modlist_headers.h modules/modlist.h -  - # Backward compat. - post_modules: post_module_objects -  - post_module_objects: $(MODULE_REQUIREMENTS) post-module-pike-stamp @LDSHARED_BASE_REQS@ -  @MODULE_BUILD_TYPE=@POST_MODULE_BUILD_TYPE@; \ -  export MODULE_BUILD_TYPE; \ -  ( cd post_modules && ( rm remake >/dev/null 2>&1 || : ) && \ -  ( $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) || \ -  ( test -f remake && $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) ) ) \ -  ) || exit $$? -  @touch post-modules-stamp -  - post-modules-stamp: $(MODULE_REQUIREMENTS) post-module-pike-stamp @LDSHARED_BASE_REQS@ -  @MODULE_BUILD_TYPE=@POST_MODULE_BUILD_TYPE@; \ -  export MODULE_BUILD_TYPE; \ -  ( cd post_modules && ( rm remake >/dev/null 2>&1 || : ) && \ -  ( $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) || \ -  ( test -f remake && $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) ) ) \ -  ) || exit $$? -  @touch post-modules-stamp -  - post_modules/modlist_headers.h: post-modules-stamp -  - post_modules/modlist.h: post-modules-stamp -  - post_modules/linker_options: post-modules-stamp -  - pike-complete-stamp: pike post-modules-stamp -  @touch pike-complete-stamp -  - $(SRCDIR)/interpret_protos.h_src: $(SRCDIR)/interpret_functions.h $(SRCDIR)/strip_opcodes -  $(CPP) $(PREFLAGS) -DGEN_PROTOS $(SRCDIR)/interpret_functions.h | $(SRCDIR)/strip_opcodes >$(SRCDIR)/interpret_protos.h_src || { rm $(SRCDIR)/interpret_protos.h_src; exit 1; } -  - lex.o: $(SRCDIR)/lex.c $(SRCDIR)/interpret_protos.h -  - interpret.o: $(SRCDIR)/lex.c $(SRCDIR)/interpret_protos.h @DTRACE_REQUIREMENTS@ -  - lex_t.o: $(SRCDIR)/lex_t.c $(SRCDIR)/interpret_protos.h -  - language.o: $(SRCDIR)/language.c $(SRCDIR)/object.h $(SRCDIR)/interpret.h $(SRCDIR)/program.h -  - $(SRCDIR)/language.c_src $(SRCDIR)/language.h_src: $(SRCDIR)/language.yacc -  @echo "Expect 1 shift/reduce conflict." -  cd $(SRCDIR) && $(YACC) $(YFLAGS) language.yacc -  mv $(SRCDIR)/y.tab.c $(SRCDIR)/language.c_src -  mv $(SRCDIR)/y.tab.h $(SRCDIR)/language.h_src -  - $(SRCDIR)/language.c: $(SRCDIR)/language.c_src -  sed -e 's/YY_COUNT_TYPE/@YY_COUNT_TYPE@/' \ -  -e 's/YY_FROM_CONST/@YY_FROM_CONST@/' \ -  -e 's/short[ ]*int[ ]/\/* short *\/ int /g' \ -  -e 's/(short[ ]*int)/(\/* short *\/ int)/g' \ -  < $(SRCDIR)/language.c_src > $(SRCDIR)/language.c -  - $(SRCDIR)/interpret_functions_fixed.h: $(SRCDIR)/interpret_functions.h precompile.sh-stamp -  ./precompile.sh --cache make_interpret_functions.pike >"$@" "$(SRCDIR)/interpret_functions.h" || { rm "$@"; exit 1; } -  - # UnixWare make needs help to find the source file... - builtin.o: $(SRCDIR)/builtin.c $(SRCDIR)/whitespace.h -  - iterators.o: $(SRCDIR)/iterators.c -  - backend.o: $(SRCDIR)/backend.c -  - libpike.o: $(SRCDIR)/libpike.c -  - # Internal testing target - run_yacc: $(SRCDIR)/language.c -  - $(SRCDIR)/configure $(SRCDIR)/stamp-h.in: $(SRCDIR)/configure.in $(SRCDIR)/aclocal.m4 $(SRCDIR)/acconfig.h -  cd $(SRCDIR) && ./run_autoconfig --no-recursion . -  echo foo > $(SRCDIR)/stamp-h.in -  - config.status propagated_variables: $(SRCDIR)/configure $(SRCDIR)/make_variables.in -  ./config.status --recheck -  @test -f propagated_variables && touch propagated_variables -  - modules/common_module_makefile: $(SRCDIR)/modules/common_module_makefile.in config.status -  -@(while :; do \ -  echo foo > cfl.common_module_makefile; test "`echo cfl.*`" = cfl.common_module_makefile && break; \ -  rm cfl.common_module_makefile; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \ -  arb=17; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \ -  done;) -  CONFIG_FILES=modules/common_module_makefile CONFIG_HEADERS="" ./config.status || \ -  (EXITCODE=$$?; rm cfl.common_module_makefile; exit $$EXITCODE) -  -@rm cfl.common_module_makefile -  - modules/static_module_makefile post_modules/static_module_makefile: modules/common_module_makefile $(SRCDIR)/modules/static_module_makefile.in config.status -  -@(while :; do \ -  echo foo > cfl.static_module_makefile; test "`echo cfl.*`" = cfl.static_module_makefile && break; \ -  rm cfl.static_module_makefile; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \ -  arb=17; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \ -  done;) -  CONFIG_FILES="modules/static_module_makefile post_modules/static_module_makefile:modules/static_module_makefile.in" CONFIG_HEADERS="" ./config.status || \ -  (EXITCODE=$$?; rm cfl.static_module_makefile; exit $$EXITCODE) -  -@rm cfl.static_module_makefile -  - modules/dynamic_module_makefile post_modules/dynamic_module_makefile: modules/common_module_makefile $(SRCDIR)/@dmmsrc@ config.status -  -@(while :; do \ -  echo foo > cfl.dynamic_module_makefile; test "`echo cfl.*`" = cfl.dynamic_module_makefile && break; \ -  rm cfl.dynamic_module_makefile; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \ -  arb=19; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \ -  done;) -  CONFIG_FILES="modules/dynamic_module_makefile:@dmmsrc@ post_modules/dynamic_module_makefile:@dmmsrc@" CONFIG_HEADERS="" ./config.status || \ -  (EXITCODE=$$?; rm cfl.dynamic_module_makefile; exit $$EXITCODE) -  -@rm cfl.dynamic_module_makefile -  - Makefile: $(SRCDIR)/Makefile.in $(SRCDIR)/dependencies config.status -  -@(while :; do \ -  echo foo > cfl.$@; test "`echo cfl.*`" = cfl.$@ && break; \ -  rm cfl.$@; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \ -  arb=23; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \ -  done;) -  CONFIG_FILES=Makefile CONFIG_HEADERS="" ./config.status || \ -  (EXITCODE=$$?; rm cfl.$@; exit $$EXITCODE) -  -@rm cfl.$@ -  touch remake -  @echo "Run make again" -  @exit 1 -  - precompile.sh: $(SRCDIR)/precompile.sh.in ./config.status -  -@(while :; do \ -  echo foo > cfl.$@; test "`echo cfl.*`" = cfl.$@ && break; \ -  rm cfl.$@; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \ -  arb=29; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \ -  done;) -  CONFIG_FILES=precompile.sh CONFIG_HEADERS="" ./config.status || \ -  (EXITCODE=$$?; rm cfl.$@; exit $$EXITCODE) -  -@rm cfl.$@ -  - # A dependency on precompile.sh-stamp only ensures that precompile.sh - # exists, not that it's older than the target. In source dists, - # precompile.sh is almost always newer than the targets that depend on - # it, e.g. builtin.c that comes with the dist. - # - # The date stamp used to be 0103000070, but that seems to confuse some - # recent OS's, that haven't heard of the 70's... - # - # Note that gnu touch is stupid, and warns about the syntax; thus the - # redirect of stderr. - # - # BSD make is stupid, and doesn't restat precompile.sh-stamp and - # recalculate the dependencies after executing the rule, thus the - # recursive use of make. - precompile.sh-stamp: -  @if [ -f precompile.sh ]; then :; else $(MAKE) precompile.sh; fi -  @touch 0101010185 precompile.sh-stamp 2>/dev/null -  - $(SRCDIR)/machine.h.in: $(SRCDIR)/stamp-h.in -  @if test -f $(SRCDIR)/machine.h.in; then :; else \ -  rm $(SRCDIR)/stamp-h.in; $(MAKE) $(SRCDIR)/stamp-h.in; \ -  fi -  - machine.h: stamp-h -  @if test -f machine.h; then :; else \ -  rm stamp-h; $(MAKE) stamp-h; \ -  fi -  - stamp-h: $(SRCDIR)/stamp-h.in $(SRCDIR)/machine.h.in config.status -  -@(while :; do \ -  echo foo > cfl.$@; test "`echo cfl.*`" = cfl.$@ && break; \ -  rm cfl.$@; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \ -  arb=31; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \ -  done;) -  CONFIG_FILES="" CONFIG_HEADERS=machine.h ./config.status || \ -  (EXITCODE=$$?; rm cfl.$@; exit $$EXITCODE) -  touch stamp-h -  -@rm cfl.$@ -  - testsuite: $(SRCDIR)/testsuite.in $(TMP_BINDIR)/mktestsuite -  if test "$$PIKE_PATH_TRANSLATE" = ""; then \ -  $(TMP_BINDIR)/mktestsuite $(SRCDIR)/testsuite.in >testsuite \ -  -DSRCDIR="`echo $(SRCDIR)|./posix_to_native.sh`"; \ -  else \ -  $(TMP_BINDIR)/mktestsuite $(SRCDIR)/testsuite.in >testsuite \ -  -DSRCDIR="`echo $(SRCDIR)|sed -e $$PIKE_PATH_TRANSLATE|./posix_to_native.sh`"; \ -  fi -  - header_uncompress: $(SRCDIR)/uncompressor.c -  $(CC) -O2 -static $(SRCDIR)/uncompressor.c -o header_uncompress @UNCOMPRESS_LIBZ@ -  - uncompress_header: $(SRCDIR)/uncompressor.c header_uncompress -  $(CC) -O2 -static $(SRCDIR)/uncompressor.c -o uncompress_header @UNCOMPRESS_LIBZ@ -DSEEK_TO=`wc -c header_uncompress|sed 's/[^0-9]//g'` -  test "`wc -c header_uncompress|sed 's/[^0-9]//g'`" = "`wc -c uncompress_header|sed 's/[^0-9]//g'`" -  - HFILES= \ -  operators.protos \ -  array.protos \ -  fd_control.protos \ -  backend.protos \ -  fdlib.protos \ -  bignum.protos \ -  fsort.protos \ -  pike_memory.protos \ -  pike_types.protos \ -  gc.protos \ -  port.protos \ -  callback.protos \ -  hashtable.protos \ -  program.protos \ -  interpret.protos \ -  constants.protos \ -  language.protos \ -  queue.protos \ -  cpp.protos \ -  rusage.protos \ -  cyclic.protos \ -  lex.protos \ -  security.protos \ -  signal_handler.protos \ -  pike_search.protos \ -  docode.protos \ -  main.protos \ -  stralloc.protos \ -  mapping.protos \ -  stuff.protos \ -  dynamic_buffer.protos \ -  svalue.protos \ -  dynamic_load.protos \ -  module_support.protos \ -  threads.protos \ -  multiset.protos \ -  encode.protos \ -  object.protos \ -  error.protos \ -  opcodes.protos \ -  version.protos \ -  builtin.protos \ -  iterators.protos \ -  rbtree.protos -  - $(HFILES): precompile.sh-stamp -  - import-stamp: $(HFILES) precompile.sh-stamp -  @./precompile.sh fake_dynamic_load.pike >import_functions.tmp $(HFILES) -  @cmp import_functions.tmp import_functions.h >/dev/null || mv import_functions.tmp import_functions.h -  @echo hej >import-stamp -  - import_functions.h: import-stamp -  test -f import-stamp || ( rm import-stamp ; $(MAKE) import-stamp ) -  - export_functions.c: import_functions.h -  touch export_functions.c -  - # Must have manual depends on all the bytecode methods in the code - # dir, since make depend will only include the one that was chosen, - # and that doesn't suffice in source dists. -  - $(SRCDIR)/pikecode.h: \ -  $(SRCDIR)/code/ia32.h \ -  $(SRCDIR)/code/amd64.h \ -  $(SRCDIR)/code/sparc.h \ -  $(SRCDIR)/code/ppc32.h \ -  $(SRCDIR)/code/ppc64.h \ -  $(SRCDIR)/code/computedgoto.h \ -  $(SRCDIR)/code/bytecode.h -  touch $(SRCDIR)/pikecode.h -  - $(SRCDIR)/pikecode.c: \ -  $(SRCDIR)/code/ia32.c \ -  $(SRCDIR)/code/amd64.c \ -  $(SRCDIR)/code/sparc.c \ -  $(SRCDIR)/code/ppc32.c \ -  $(SRCDIR)/code/ppc64.c \ -  $(SRCDIR)/code/computedgoto.c \ -  $(SRCDIR)/code/bytecode.c -  touch $(SRCDIR)/pikecode.c -  - @dependencies@ +    Newline at end of file removed.