pike.git
/
src
/
Makefile.in
version
»
Context lines:
10
20
40
80
file
none
3
pike.git/src/Makefile.in:1:
-
# This line is needed on some machines.
-
@SET_MAKE@
-
-
# Pike embed target, either libpike.so or libpike.a.
-
PIKE_LIB=@PIKE_LIB@
-
-
# Don't change this line. Define EXTRALIBS before this line if you
-
# wish to add any libraries.
-
LIBS=@LIBS@ $(EXTRALIBS)
-
-
# This is normall the install program in the source directory
-
INSTALL=@INSTALL@
-
-
SRCDIR=@srcdir@
-
VPATH=@srcdir@
-
-
# These are used while compiling
-
LIBDIR_SRC = @LIBDIR@
-
TMP_BINDIR = @BINDIR@
-
TMP_BUILDDIR = @BUILDDIR@
-
TMP_LIBDIR = $(TMP_BUILDDIR)/lib
-
-
# This is used during autodoc extraction.
-
DOCDIR = @DOCDIR@
-
-
# These are used during binary exports and installation.
-
MANDIR_SRC = @MANDIR@
-
DOCDIR_SRC = @DOCDIR@
-
BASEDIR = @BASEDIR@
-
PACKAGINGDIR = $(SRCDIR)/../packaging
-
-
# These are used by the files generated by fixdepends.sh
-
PIKE_SRC_DIR=$(SRCDIR)
-
BUILD_BASE=
-
-
# The precompiler API level used by cmod files in the src root directory.
-
PRECOMPILER_ARGS=--api=3
-
-
#
-
# RPM and package builders, listen up, because this is your only
-
# documentation! This variable is prepended to the install path.
-
# Please note that Pike will not work until moved into the proper
-
# place. -Hubbe
-
#
-
buildroot=
-
-
prefix = @prefix@
-
exec_prefix = @exec_prefix@
-
bindir = @bindir@
-
lib_prefix = @libdir@/pike
-
data_prefix = @datadir@
-
share_prefix = $(data_prefix)/pike
-
man_prefix = @mandir@
-
include_prefix = @includedir@/pike
-
-
# Arguments for test_pike.pike used by the verify targets.
-
# TESTARGS = -F -a
-
-
# Arguments for install.pike used by the install targets.
-
INSTALLARGS = --new-style
-
-
#
-
# use bison please, yacc isn't good enough.
-
#
-
YACC=@YACC@
-
YFLAGS=-d -v
-
-
#
-
# This may be -pg
-
#
-
PROFIL=@PROFIL@
-
-
#
-
# OS dependant flags
-
#
-
OSFLAGS=@OSFLAGS@
-
-
#
-
#Enable warnings from the compiler, if wanted.
-
#
-
WARN=@WARN@
-
-
#add extra defines here
-
DEFINES=@CPPFLAGS@ -DPIKE_CORE
-
-
# -O should work with all compilers
-
OPTIMIZE=@OPTIMIZE@
-
-
# interpret.o can't have -fomit-frame-pointer
-
INTERPRET_DEOPTIMIZE=@INTERPRET_DEOPTIMIZE@
-
-
# Set to a flag for parallelizing make, e.g. -j2. It's given to make
-
# at the level where it's most effective.
-
MAKE_PARALLEL=
-
-
# Preprocessor flags.
-
PREFLAGS=-DPIKE_SRC_ROOT="$(BASEDIR)" -I. -I$(SRCDIR) $(DEFINES)
-
OTHERFLAGS=@CFLAGS@ $(OSFLAGS) $(OPTIMIZE) $(WARN) $(PROFIL)
-
NOOPTFLAGS=@CFLAGS@ @CPPFLAGS@ $(OSFLAGS) $(WARN) $(PROFIL)
-
CFLAGS=$(PREFLAGS) $(OTHERFLAGS)
-
-
SMARTLINK=@SMARTLINK@
-
REALCC=@REALCC@
-
CC=@CC@
-
CXX=@CXX@
-
CPP=@CPP@
-
GDB=gdb
-
-
CANDLE=@CANDLE@ -nologo
-
LIGHT=@LIGHT@ -nologo
-
RCEXE=@RCEXE@
-
-
FALLBACK_CC=@FALLBACK_CC@
-
-
AR=@AR@
-
-
LD=@LD@
-
LINKFORSHARED=@LINKFORSHARED@
-
LDFLAGS=@LDFLAGS@ $(LINKFORSHARED) $(EXTRALDFLAGS)
-
LDSHARED=@LDSHARED@
-
-
DEFAULT_RUNPIKE=$(TMP_BUILDDIR)/pike -DNOT_INSTALLED -DPRECOMPILED_SEARCH_MORE -m$(TMP_BUILDDIR)/master.pike $(PIKEOPTS)
-
USE_TPIKE=$(TMP_BUILDDIR)/precompile.sh
-
USE_PIKE=pike $(PIKEOPTS)
-
RUNPIKE=$(@RUNPIKE@)
-
RUNTPIKE=$(@RUNTPIKE@)
-
PIKE_MODULE_RELOC=@PIKE_MODULE_RELOC@
-
-
# Set to an appropriate invocation of valgrind (or similar)
-
VALGRIND=@VALGRIND@
-
VALGRINDARGS=@VALGRINDARGS@
-
-
MAKE_FLAGS=
-
-
# Add alloca.o if you don't have alloca() on your machine.
-
#
-
CORE_OBJ= \
-
language.o \
-
security.o \
-
bignum.o \
-
pike_cpulib.o \
-
interpret.o \
-
constants.o \
-
cpp.o \
-
fdlib.o \
-
cyclic.o \
-
array.o \
-
backend.o \
-
callback.o \
-
encode.o \
-
docode.o \
-
dynamic_buffer.o \
-
dynamic_load.o \
-
error.o \
-
fd_control.o \
-
fsort.o \
-
gc.o \
-
hashtable.o \
-
lex.o \
-
multiset.o \
-
signal_handler.o \
-
pike_search.o \
-
pike_types.o \
-
pike_embed.o \
-
mapping.o \
-
pike_memory.o \
-
module_support.o \
-
pikecode.o \
-
object.o \
-
opcodes.o \
-
operators.o \
-
pike_float.o \
-
port.o \
-
program.o \
-
rbtree.o \
-
rusage.o \
-
sprintf.o \
-
sscanf.o \
-
stralloc.o \
-
stuff.o \
-
threads.o \
-
version.o \
-
queue.o \
-
builtin.o \
-
iterators.o \
-
facetgroup.o \
-
svalue.o \
-
las.o \
-
builtin_functions.o \
-
peep.o @DLOPEN_O@ @EXTRA_OBJS@
-
-
OBJ=$(CORE_OBJ) @MODULE_O@
-
-
MODULE_REQUIREMENTS= \
-
headerfiles-stamp \
-
machine.h \
-
global.h \
-
precompile.sh-stamp \
-
modules/static_module_makefile \
-
modules/dynamic_module_makefile \
-
post_modules/static_module_makefile \
-
post_modules/dynamic_module_makefile \
-
propagated_variables \
-
$(SRCDIR)/language.h \
-
$(SRCDIR)/interpret_protos.h \
-
lib @EXTRA_MODULE_REQUIREMENTS@
-
-
SRC_TARGETS= \
-
$(SRCDIR)/language.c \
-
$(SRCDIR)/language.h \
-
$(SRCDIR)/interpret_protos.h \
-
$(SRCDIR)/interpret_functions_fixed.h \
-
$(SRCDIR)/peep_engine.c \
-
$(SRCDIR)/case_info.h \
-
$(SRCDIR)/whitespace.h \
-
$(SRCDIR)/treeopt.h @PMOD_TARGETS@
-
-
-
#
-
# User callable targets
-
#
-
-
# Update the dumped modules, but only if dump_modules has been used earlier.
-
all: module_objects post_module_objects pike-complete-stamp tools
-
@if [ -f dumpversion ]; then \
-
echo "$(MAKE) $(MAKE_FLAGS) dump_modules"; \
-
$(MAKE) $(MAKE_FLAGS) dump_modules; \
-
else :; fi
-
@if [ "`find . -name '*.fail' -print`" = "" ]; then :; else \
-
echo; \
-
echo "Pike compiled and linked ok, but the following file(s) "; \
-
echo "failed to compile with full optimization.";\
-
echo "This may affect performance negatively."; \
-
find . -name '*.fail' -print | sed -e 's/\.fail$$//' -e 's/^/ /'; \
-
echo; \
-
fi
-
-
doc: documentation
-
-
documentation: onepage.xml traditional.xml modref.xml
-
cd $(DOCDIR) && $(MAKE) $(MAKE_FLAGS) PIKE="$(RUNPIKE)" \
-
BUILDDIR="$(TMP_BUILDDIR)" $(DOCTARGET)
-
-
# Creation of bundles/include/pike/.
-
-
headerfiles-stamp: bundles/include/pike machine.h global.h $(SRC_TARGETS) force
-
@$(MAKE) $(MAKE_FLAGS) headerfiles_low HEADERS="machine.h" HEADERSOURCE="`pwd`"
-
@$(MAKE) $(MAKE_FLAGS) headerfiles_low HEADERS="`cd $(SRCDIR) && echo *.h`" HEADERSOURCE="$(SRCDIR)"
-
@test -f headerfiles-stamp || echo foo > headerfiles-stamp
-
-
headerfiles_low: force
-
@for f in $(HEADERS); do \
-
if [ -h "bundles/include/pike/$$f" ]; then continue; fi; \
-
if cmp "$(HEADERSOURCE)/$$f" "bundles/include/pike/$$f" >/dev/null 2>&1 ; then continue; fi; \
-
rm -f bundles/include/pike/$$f 2>/dev/null; \
-
echo "Creating bundles/include/pike/$$f"; \
-
if ln -s "$(HEADERSOURCE)/$$f" "bundles/include/pike/$$f" && \
-
ls -L "bundles/include/pike/$$f" >/dev/null 2>&1; then :; else \
-
echo "Symlink failed."; \
-
cp "$(HEADERSOURCE)/$$f" "bundles/include/pike/$$f" || exit 1; \
-
fi; \
-
echo foo > headerfiles-stamp; \
-
done
-
-
bundles/include/pike: bundles/include
-
test -d bundles/include/pike/. || mkdir bundles/include/pike
-
-
bundles/include: bundles
-
test -d bundles/include/. || mkdir bundles/include
-
-
bundles:
-
test -d bundles/. || mkdir bundles
-
-
compiler-warnings : clean
-
@echo Summarizing compiler warnings.
-
@echo
-
@if $(MAKE) $(MAKE_FLAGS) all 2>compiler-warnings ; then \
-
echo; \
-
echo 'Compilation warning summary:'; \
-
echo '----------------------------'; \
-
else \
-
echo; \
-
echo 'Compilation warning and error summary:'; \
-
echo '--------------------------------------'; \
-
fi
-
@echo
-
@cat compiler-warnings
-
@echo
-
@echo 'End of summary'
-
@echo '--------------'
-
-
#
-
# We assume that Pike.framework will be used as an embedded framework within an application bundle.
-
# if you want to install the framework in a standard location, like /Library/Frameworks, you will
-
# need to use install_name_tool to change the location. don't blame me, blame dyld.
-
#
-
# the following target assumes MacOS X 10.6 or higher, and is configured to use garbage collection
-
framework: OCPikeInterpreter.o $(OBJ) modules/linker_options @STATIC_POST_MODULES_LINKOPTS@
-
@echo "Linking Pike.framework";\
-
gcc -o Pike OCPikeInterpreter.o $(OBJ) `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` -framework Cocoa \
-
-dynamiclib -Wl,-no_pie -mpic-no-dynamic -Wl,-single_module \
-
-undefined dynamic_lookup -mmacosx-version-min=10.4 -current_version 7.9 -install_name @executable_path/../Frameworks/Pike.framework/Pike \
-
-isysroot /Developer/SDKs/MacOSX10.6.sdk
-
ls -l Pike
-
if test -x Pike.framework ; then rm -rf Pike.framework; fi
-
mkdir Pike.framework
-
mkdir Pike.framework/Versions
-
mkdir Pike.framework/Versions/7.7
-
mkdir Pike.framework/Versions/7.7/Headers
-
mkdir Pike.framework/Versions/7.7/Resources
-
mkdir Pike.framework/Versions/7.7/Resources/lib
-
mv Pike Pike.framework/Versions/7.7
-
cd Pike.framework/Versions && ln -s 7.7 Current
-
cd Pike.framework && ln -s Versions/Current/Resources Resources && ln -s Versions/Current/Headers Headers && \
-
ln -s Versions/Current/Pike Pike
-
cp $(SRCDIR)/*.h Pike.framework/Versions/7.7/Headers
-
cp *.h Pike.framework/Versions/7.7/Headers
-
cp $(PACKAGINGDIR)/macosx/framework_Info.plist Pike.framework/Versions/7.7/Resources/Info.plist
-
MACHINE=`uname -m | tr " " "_"` && mkdir Pike.framework/Versions/7.7/Resources/$$MACHINE && cp -rf lib/* Pike.framework/Versions/7.7/Resources/$$MACHINE
-
cp -rf $(SRCDIR)/../lib/* Pike.framework/Versions/7.7/Resources/lib
-
cp master.pike Pike.framework/Versions/7.7/Resources/lib
-
cd Pike.framework && find . -type f -name '*.in' -exec rm -f {} \;
-
cd Pike.framework && find . -type d -name CVS -prune -exec rm -rf {} \;
-
-
libpike.so: $(OBJ) modules/linker_options @STATIC_POST_MODULES_LINKOPTS@
-
@echo "Linking libpike.so";\
-
if $(TMP_BINDIR)/smartlink "$(LDSHARED)" $(LDFLAGS) -o libpike.@SO@ \
-
$(OBJ) `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` \
-
$(LIBS); then \
-
if test "@SO@" != so ; then mv "module.@SO@" module.so ; \
-
else :; fi ;\
-
else \
-
echo "Linking failed:" >&2; \
-
echo $(TMP_BINDIR)/smartlink "$(LDSHARED)" $(LDFLAGS) -o libpike.@SO@ \
-
$(OBJ) `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` \
-
$(LIBS) >&2 ;\
-
exit 1; \
-
fi
-
-
# FIXME: Static linked version; this doesn't work yet!
-
# Since we need to split linker_options into archives and options.
-
libpike.a: $(OBJ) modules/linker_options @STATIC_POST_MODULES_LINKOPTS@
-
-rm -f libpike.a
-
$(AR) cq libpike.a $(OBJ)
-
-@RANLIB@ libpike.a
-
-
# tpike is only used when dynamic modules aren't. It's a pike with no
-
# post modules linked in which is used during building of the post
-
# modules.
-
tpike-real: main.o $(CORE_OBJ) tmodule.o modules/linker_options
-
-@rm -f tpike tpike.exe
-
$(LD) $(LDFLAGS) main.o $(CORE_OBJ) tmodule.o \
-
`cat modules/linker_options` \
-
$(LIBS) -o tpike@EXEEXT@
-
-
# Only want tpike to exist for use with $(RUNPIKE) in the modules. We
-
# don't want to require it actually being up-to-date.
-
tpike@EXEEXT@: master-stamp
-
$(MAKE) $(MAKE_FLAGS) $(MAKE_PARALLEL) tpike-real
-
-
# If we build without dynamic modules then tpike is built first with
-
# all modules under modules/ linked into it, then tpike is used for
-
# post_modules source targets, and then pike is linked with both
-
# modules/ and post_modules/.
-
#
-
# If we build with dynamic modules then pike is built first with the
-
# few always-static modules under modules/, then the dynamic modules
-
# under modules/ are built, then pike is used for post_modules source
-
# targets, and then all modules under post_modules/ are built
-
# dynamically.
-
#
-
# This means that a post_module can't be always-static and can't add
-
# stuff to the pike linkage using LINKER_OPTIONS.
-
#
-
# @LDSHARED_BASE_REQS@ expands to pike.lib if dynamic DLL modules are
-
# used on NT.
-
pike@EXEEXT@ pike.lib: main.o $(OBJ) master-stamp pike.syms modules/linker_options @STATIC_POST_MODULES_LINKOPTS@ @PIKE_ICON_RES@
-
-@if [ -f pike.old.exe ] ; then rm -f pike.old.exe || : ; else : ; fi
-
-@if [ -f pike.old ] ; then rm -f pike.old || : ; else : ; fi
-
-@if [ -f pike.exe ] ; then mv pike.exe pike.old.exe || : ; else : ; fi
-
-@if [ -f pike ] ; then mv pike pike.old || : ; else : ; fi
-
# $(LD) $(LDFLAGS) main.o @DLOPEN_O@ -o pike@EXEXT@
-
$(LD) $(LDFLAGS) main.o $(OBJ) \
-
`cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` \
-
$(LIBS) @PIKE_ICON_RES@ -o pike@EXEEXT@
-
@MT_FIX_PIKE_EXE@
-
# The dumped modules are removed whenever Pike is relinked since some
-
# of the bytecode methods (e.g. ia32) store absolute addresses to
-
# global structs. That should probably be fixed in them so that dumped
-
# modules aren't link order dependent.
-
@if [ -f dumpversion ]; then \
-
echo "$(MAKE) $(MAKE_FLAGS) delete_dumped_modules"; \
-
$(MAKE) $(MAKE_FLAGS) delete_dumped_modules; \
-
else :; fi
-
-
# gcov
-
gcov:
-
@for f in `cd "$(SRCDIR)" && find . -type f -name '*.c' -print`; do \
-
if test -f `echo $$f | sed -e 's/\.$$/.bb/'`; then \
-
for gf in `gcov $$f | sed -e 's/Creating \(.*\)\.gcov.*/\1.gcov/p' -ed`; do \
-
echo "Generating $$f-$$gf."; \
-
test -f "$$f-$$gf" && rm -f "$$f-$$gf"; \
-
mv "$$gf" "$$f-$$gf"; \
-
done; \
-
else \
-
:; \
-
fi; \
-
done
-
@echo
-
@echo "Summary:"
-
@for f in `find . -name '*.gcov' -print`; do \
-
grep '######' $$f | \
-
grep -v fatal | \
-
grep -v -i inline | \
-
grep -v PIKE_MODULE_EXIT | \
-
egrep -v '######[ ]*{$$' | \
-
egrep -v '######[ ]*}$$' | \
-
wc -l | sed -e "s|^|$$f:|" -e 's/:[ ]*/:/' | \
-
grep -v ':0'; \
-
done | sort -n -t: -k2
-
-
# purify
-
pure: $(OBJ) master-stamp module_objects
-
-@mv pike@EXEEXT@ pike.old@EXEEXT@ 2>/dev/null || true
-
$(SMARTLINK) purify -max-threads=128 -thread_stack_change=8192 -free-queue-length=500 -inuse-at-exit=yes -chain-length=12 $(REALCC) $(LDFLAGS) $(OBJ) `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` $(LIBS) -o pike@EXEEXT@
-
-
# purecov
-
cover: $(OBJ) master-stamp module_objects
-
-@mv pike@EXEEXT@ pike.old@EXEEXT@ 2>/dev/null || true
-
$(SMARTLINK) purecov purify -max-threads=128 -thread_stack_change=8192 -free-queue-length=500 -inuse-at-exit=yes -chain-length=12 $(REALCC) $(LDFLAGS) $(OBJ) `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` $(LIBS) -o pike@EXEEXT@
-
-
# quantify
-
quant: $(OBJ) master-stamp module_objects
-
-@mv pike@EXEEXT@ pike.old@EXEEXT@ 2>/dev/null || true
-
$(SMARTLINK) quantify $(REALCC) $(LDFLAGS) $(OBJ) `cat modules/linker_options @STATIC_POST_MODULES_LINKOPTS@` $(LIBS) -o pike@EXEEXT@
-
-
splint:
-
splint $(PREFLAGS) -warnposix +charintliteral -realcompare -boolops -predboolint $(FILE)
-
-
atom: pike-complete-stamp
-
atom pike -tool atom -env threads -g -v `find lib/modules -type f -name '*.so' -print | sed -e 's/^/-incobj /g'`
-
mv pike pike.pre-atom
-
mv pike.third.threads pike
-
@echo Make sure you have '.' in your LD_LIBRARY_PATH.
-
-
pixie: pike-complete-stamp
-
atom pike -tool pixie -env threads -g -v `find lib/modules -type f -name '*.so' -print | sed -e 's/^/-incobj /g'`
-
mv pike pike.pre-pixie
-
mv pike.pixie.threads pixie
-
@echo Make sure you have '.' in your LD_LIBRARY_PATH.
-
-
tools: hilfe rsif
-
-
hilfe: $(TMP_BINDIR)/hilfe Makefile
-
@echo "Creating hilfe..."; \
-
( sed -e 's!/usr/bin/env pike!$(bindir)/pike!' \
-
<$(TMP_BINDIR)/hilfe >./hilfe && chmod 755 ./hilfe) || exit 1 ;
-
-
rsif: $(TMP_BINDIR)/rsif Makefile
-
@echo "Creating rsif..."; \
-
( sed -e 's!pike!$(bindir)/pike!' <$(TMP_BINDIR)/rsif \
-
>./rsif && chmod 755 ./rsif) || exit 1 ;
-
-
dump_modules: pike-complete-stamp master-stamp
-
-rm dumpmodule.log
-
args="$(DUMPARGS)"; \
-
args=$${args:-"--log-file --update-only=dumpversion --report-failed"}; \
-
$(RUNPIKE) -x dump $$args \
-
--recursive --target-dir=lib "$(LIBDIR_SRC)/modules"
-
-
force_dump_modules:
-
-rm dumpversion 2>/dev/null
-
$(MAKE) $(MAKE_FLAGS) dump_modules
-
-
delete_dumped_modules:
-
-find lib -type f -name \*.o | xargs rm -f
-
-
undump_modules: delete_dumped_modules
-
-rm dumpversion 2>/dev/null
-
-
.SUFFIXES:
-
.SUFFIXES: .c .h .o .m .mmod .cmod .symlist .pp .pph .protos .h_src .wxs .wixobj .msi .msm
-
-
.c.pp:
-
$(CPP) $(PREFLAGS) -DPMOD_EXPORT=PMOD_EXPORT \
-
-DPMOD_PROTO=PMOD_PROTO "$<" >"$@"
-
-
.c.protos: precompile.sh-stamp
-
./precompile.sh --cache fake_dynamic_load.pike >"$@" --cpp --protos \
-
$(CPP) $(PREFLAGS) -DPMOD_EXPORT=PMOD_EXPORT \
-
-DPMOD_PROTO=PMOD_PROTO -DPIKE_PRECOMPILER=1 "$<" || \
-
{ rm "$@"; exit 1; }
-
-
.h.pph:
-
$(CPP) $(PREFLAGS) -DPMOD_EXPORT=PMOD_EXPORT \
-
-DPMOD_PROTO=PMOD_PROTO "$<" >"$@"
-
-
-
# Several optimizers have problems with interpret.c
-
# First try compiling with optimization and if that doesn't work, without.
-
# GCC dumps core on some files @ OSF1
-
# This kluge should work around that...
-
# Extra kludge added: interpret.o gets special flags (deoptimization)
-
.c.o:
-
@echo "Compiling `echo '$<' | sed -e 's|^$(PIKE_SRC_DIR)/||'`" ; \
-
rm -f $@.fail >/dev/null 2>&1; \
-
if test "x$@" = "xinterpret.o"; then EXTRAFLAGS="$(INTERPRET_DEOPTIMIZE)"; else EXTRAFLAGS=; fi; \
-
if $(CC) $(CFLAGS) $$EXTRAFLAGS -c $< -o $@ ; then : ; else \
-
status=$$?; \
-
if test x"@noopt_retry@" = xyes ; then \
-
echo "WARNING: Compiler failure! Trying without optimization!" >&2;\
-
echo "$(CC) $(PREFLAGS) $(CFLAGS) $$EXTRAFLAGS -c $< -o $@" >$@.fail ;\
-
if NO_ULIMIT=yes $(CC) $(PREFLAGS) $(NOOPTFLAGS) $$EXTRAFLAGS -c $< -o $@ ; then : ; else \
-
status=$$?; \
-
echo "Compilation command was:" >&2;\
-
echo "$(CC) $(PREFLAGS) $(NOOPTFLAGS) $$EXTRAFLAGS -c $< -o $@" >&2 ;\
-
exit $$status; \
-
fi; \
-
else \
-
echo "Compilation command was:" >&2;\
-
echo "$(CC) $(PREFLAGS) $(CFLAGS) $$EXTRAFLAGS -c $< -o $@" >&2 ;\
-
exit $$status; \
-
fi; \
-
fi
-
-
.m.o:
-
@echo "Compiling `echo '$<' | sed -e 's|^$(PIKE_SRC_DIR)/||'`" ; \
-
rm -f $@.fail >/dev/null 2>&1; \
-
if test "x$@" = "xinterpret.o"; then EXTRAFLAGS="$(INTERPRET_DEOPTIMIZE)"; else EXTRAFLAGS=; fi; \
-
if $(CC) $(CFLAGS) $$EXTRAFLAGS -fobjc-exceptions -fobjc-gc -c $< -o $@ ; then : ; else \
-
status=$$?; \
-
if test x"@noopt_retry@" = xyes ; then \
-
echo "WARNING: Compiler failure! Trying without optimization!" >&2;\
-
echo "$(CC) $(PREFLAGS) $(CFLAGS) $$EXTRAFLAGS -fobjc-exceptions -c $< -o $@" >$@.fail ;\
-
if NO_ULIMIT=yes $(CC) $(PREFLAGS) $(NOOPTFLAGS) $$EXTRAFLAGS -c $< -o $@ ; then : ; else \
-
status=$$?; \
-
echo "Compilation command was:" >&2;\
-
echo "$(CC) $(PREFLAGS) $(NOOPTFLAGS) $$EXTRAFLAGS -fobjc-exceptions -c $< -o $@" >&2 ;\
-
exit $$status; \
-
fi; \
-
else \
-
echo "Compilation command was:" >&2;\
-
echo "$(CC) $(PREFLAGS) $(CFLAGS) $$EXTRAFLAGS -fobjc-exceptions -c $< -o $@" >&2 ;\
-
exit $$status; \
-
fi; \
-
fi
-
-
#
-
# Please note that this must be accompanied by a dependency rule as
-
# The .c file will not be created in the SOURCE directory otherwise.
-
# -Hubbe
-
#
-
.cmod.c: precompile.sh-stamp $(TMP_BINDIR)/precompile.pike
-
./precompile.sh --cache precompile.pike $(PRECOMPILER_ARGS) >"$@" "$<" || { rm "$@"; exit 1; }
-
-
# The same applies to this.
-
.symlist.c: precompile.sh-stamp $(SRCDIR)/mklibpike.pike
-
./precompile.sh --cache $(SRCDIR)/mklibpike.pike -I. -I "$(SRCDIR)" -S "$<" -o "$@" || { rm "$@"; exit 1; }
-
-
# This rule is used for some header files that are generated from the
-
# source, to avoid excessive rebuilding when the source change in ways
-
# that doesn't affect the header.
-
#
-
# It can cause a .h target to be out-of-date repeatedly, but since it
-
# runs fast that's not an issue. This technique only works well in
-
# make's that stat the target again after the rule has run and
-
# recalculate the dependencies from that. Most make's seems to behave
-
# like that.
-
.h_src.h:
-
@if test -f "$@"; then \
-
test -f "$@.nolines" || \
-
sed -e '/^[ \t]*$$/d;/^[ \t]*#[ \t]*line.*$$/d' < "$@" > "$@.nolines" && \
-
sed -e '/^[ \t]*$$/d;/^[ \t]*#[ \t]*line.*$$/d' < "$<" > "$<.nolines" && \
-
cmp -s "$<.nolines" "$@.nolines"; \
-
else \
-
false; \
-
fi || ( \
-
rm -f "$@.nolines" 2>/dev/null; \
-
echo "cp $< $@"; \
-
cp "$<" "$@"; \
-
)
-
-
.wxs.wixobj:
-
@if test -f "$@"; then rm -f "$@"; else :; fi # Paranoia
-
$(CANDLE) "$<" -out "$@" || { rm -f "$@"; exit 1; }
-
-
.wixobj.msm:
-
@test -d cab_cache || mkdir cab_cache
-
@if test -f "$@"; then rm -f "$@"; else :; fi # Paranoia
-
$(LIGHT) "$<" -cc cab_cache -o "$@" || { rm -f "$@"; exit 1; }
-
-
.wixobj.msi:
-
@test -d cab_cache || mkdir cab_cache
-
@if test -f "$@"; then rm -f "$@"; else :; fi # Paranoia
-
$(LIGHT) "$<" -cc cab_cache -o "$@" || { rm -f "$@"; exit 1; }
-
-
Pike_banner.bmp: $(SRCDIR)/make_banner.pike $(SRCDIR)/../refdoc/src_images/pike_logo.gif
-
$(RUNPIKE) $(SRCDIR)/make_banner.pike $(SRCDIR)/../refdoc/src_images/pike_logo.gif >Pike_banner.bmp || rm Pike_banner.bmp
-
-
UpFldrBtn.ibd: $(PACKAGINGDIR)/windows/UpFldrBtn.ibd
-
cp "$<" "$@"
-
-
NewFldrBtn.ibd: $(PACKAGINGDIR)/windows/NewFldrBtn.ibd
-
cp "$<" "$@"
-
-
PikeWin32Installer.vbs: $(PACKAGINGDIR)/windows/installer.vbs
-
@if [ -f "$@" ] && cmp "$<" "$@" >/dev/null; then \
-
echo "PikeWin32Installer.vbs is up to date."; \
-
else \
-
echo cp '"'"$<"'"' '"'"$@"'"'; \
-
cp "$<" "$@"; \
-
fi
-
-
Pike_module.msm: PikeWin32Installer.vbs
-
-
Pike_module.wxs: pike-complete-stamp $(TMP_BINDIR)/install.pike Makefile
-
@no_autodoc="--no-autodoc"; \
-
if [ -f autodoc.xml ]; then no_autodoc=""; fi; \
-
$(RUNPIKE) $(TMP_BINDIR)/install.pike --wix-module $$no_autodoc \
-
@INSTALL_EXPORT_ARGS@ \
-
exec_prefix="$(bindir)" lib_prefix="$(lib_prefix)" \
-
TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \
-
SRCDIR="$(SRCDIR)" prefix="$(prefix)" DOCDIR_SRC="$(DOCDIR_SRC)" \
-
MANDIR_SRC="$(MANDIR_SRC)" \
-
BASEDIR="$(BASEDIR)" man_prefix="$(man_prefix)" \
-
cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \
-
pike_name=$(pike_name) PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)"
-
-
Pike.wxs: $(TMP_BINDIR)/install.pike Makefile
-
@no_autodoc="--no-autodoc"; \
-
if [ -f autodoc.xml ]; then no_autodoc=""; fi; \
-
$(RUNPIKE) $(TMP_BINDIR)/install.pike --wix $$no_autodoc \
-
@INSTALL_EXPORT_ARGS@ \
-
exec_prefix="$(bindir)" lib_prefix="$(lib_prefix)" \
-
TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \
-
SRCDIR="$(SRCDIR)" prefix="$(prefix)" DOCDIR_SRC="$(DOCDIR_SRC)" \
-
MANDIR_SRC="$(MANDIR_SRC)" \
-
BASEDIR="$(BASEDIR)" man_prefix="$(man_prefix)" \
-
cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \
-
pike_name=$(pike_name) PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)"
-
-
Pike.msi: Pike.wixobj Pike_ui.wixobj Pike_module.msm Pike_banner.bmp UpFldrBtn.ibd NewFldrBtn.ibd
-
@test -d cab_cache || mkdir cab_cache
-
@if test -f Pike.msi; then rm Pike.msi; else :; fi # Paranoia
-
$(LIGHT) Pike.wixobj Pike_ui.wixobj -o Pike.msi -cc cab_cache
-
-
wix: Pike.msi
-
-
wix_export: Pike.msi
-
VER=`$(RUNPIKE) --dumpversion` ;\
-
cp Pike.msi $(BASEDIR)/Pike-v$(VER)-win32.msi ;\
-
cp config.info $(BASEDIR)/Pike-v$(VER)-win32.info
-
-
force :
-
@:
-
-
pike.ico: $(PACKAGINGDIR)/windows/pike.ico
-
cp "$<" $@
-
-
pike_icon.res: pike.ico
-
echo 'pike ICON pike.ico' > pike_icon.rc
-
$(RCEXE) /fo $@ pike_icon.rc
-
-
# install
-
install: pike-complete-stamp tools
-
@$(RUNPIKE) $(TMP_BINDIR)/install.pike \
-
exec_prefix="$(bindir)" lib_prefix="$(lib_prefix)" \
-
include_prefix="$(include_prefix)" \
-
TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \
-
SRCDIR="$(SRCDIR)" prefix="$(prefix)" DOCDIR_SRC="$(DOCDIR_SRC)" \
-
MANDIR_SRC="$(MANDIR_SRC)" \
-
man_prefix="$(man_prefix)" pike_name=$(pike_name) \
-
fakeroot="$(buildroot)" PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)" \
-
cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \
-
$(INSTALLARGS)
-
-
install_interactive: pike-complete-stamp tools
-
@$(RUNPIKE) $(TMP_BINDIR)/install.pike --interactive \
-
exec_prefix="$(bindir)" prefix=$(prefix) \
-
TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \
-
SRCDIR="$(SRCDIR)" DOCDIR_SRC="$(DOCDIR_SRC)" \
-
MANDIR_SRC="$(MANDIR_SRC)" \
-
cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \
-
fakeroot="$(buildroot)" PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)"
-
-
# tidy up a bit
-
tidy:
-
-rm -f a.out a.out.* *.fail *.pp *.protos core y.output y.tab.c y.tab.h
-
-rm -f core core.* *.o *.obj *.i *.i~ dynloadtest* cfl.*
-
-rm -f conftest.* hdrlist.h a.out.exe
-
-rm testsuite testsuite.tmp testsuite_test.pike testsuite_test_dir.pmod
-
-rm -f *.wixobj *.wxs Pike_banner.bmp UpFldrBtn.ibd NewFldrBtn.ibd PikeWin32Installer.vbs
-
-rm -f pike.ico pike_icon.rc pike_icon.res
-
-find lib -type f -name \*.o -o -name \*.obj | xargs rm -f
-
-
# make clean
-
clean_here: tidy doc_clean
-
-( cd tlib; find . -name testsuite | xargs rm )
-
-( cd extra_tests; find . -name testsuite | xargs rm )
-
-rm -f confdefs.h
-
-rm -rf test-install test-pike tpike tpike.* *.pdb
-
-rm -f TAGS tags yacc.acts yacc.debug yacc.tmp *.debug.log a.out pike.tmp
-
-rm -f hilfe rsif master.pike compiler-warnings dumpmodule.log
-
-rm -f interpreter_debug.h lexer?.h
-
-rm -f import-stamp master-stamp headerfiles-stamp
-
-rm -f static-modules-stamp dynamic-modules-stamp post-modules-stamp
-
-rm -f post-module-pike-stamp pike-complete-stamp
-
-rm -rf lib/modules/*
-
# -rm -f lib/master.pike
-
-
clean: clean_here
-
-( cd modules; $(MAKE) $(MAKE_FLAGS) clean )
-
-( cd post_modules; $(MAKE) $(MAKE_FLAGS) clean )
-
-
clean_pike:
-
-rm -f pike pike.lib pike.exe pike.exe.manifest pike.exp
-
-
# Clean up everything that needs to go if the configure args change.
-
config_change_clean: clean clean_pike
-
-
# make _really_ clean
-
spotless: clean_here clean_pike
-
-( cd modules; $(MAKE) $(MAKE_FLAGS) spotless )
-
-( cd post_modules; $(MAKE) $(MAKE_FLAGS) spotless )
-
-(cd $(SRCDIR); find . -type f -name '*.h.in' -print) | \
-
sed -e 's/\.in$$//' | xargs rm -f
-
-rm -f Makefile config.* make_variables specs pike.syms
-
-rm -f .pure stamp-h
-
-rm -f lexical.c mon.out *.ln
-
-rm -f pike pike.exe pike.old pike.old.exe l.outa* num_files_to_install
-
-rm -f *.msm *.msi
-
-rm -f precompile.sh precompile.sh-stamp smartlink
-
-rm -rf tlib extra_tests lib precompile
-
-
distclean: spotless
-
-
# FIXME: Use .gitignore instead.
-
gitclean: distclean
-
( for d in `cd $(SRCDIR) && find . -type d -print`; do \
-
if test -f "$(SRCDIR)/$$d/.cvsignore" ; then \
-
(cd "$$d" && rm -f `cat "$(SRCDIR)/$$d/.cvsignore"`); \
-
(cd "$(SRCDIR)/$$d" && rm -f `cat "$(SRCDIR)/$$d/.cvsignore"`); \
-
else :; fi; \
-
done)
-
-
cvsclean: gitclean
-
-
# create tags
-
tags:
-
ctags *.c
-
-
TAGS:
-
etags -t *.h *.c
-
-
# verify / debug
-
testsuites:
-
$(MAKE) $(MAKE_FLAGS) testsuite
-
( cd modules && $(MAKE) $(MAKE_FLAGS) testsuites )
-
( cd post_modules && $(MAKE) $(MAKE_FLAGS) testsuites )
-
( cd $(TMP_BUILDDIR) && $(TMP_BINDIR)/mklibtests.sh \
-
--srcdir=$(LIBDIR_SRC) \
-
--destdir=tlib --bindir=$(TMP_BINDIR) )
-
if test -d "$(BASEDIR)/extra_tests" ; then \
-
(cd "$(TMP_BUILDDIR)" && $(TMP_BINDIR)/mklibtests.sh \
-
--srcdir="$(BASEDIR)/extra_tests" \
-
--destdir=extra_tests --bindir=$(TMP_BINDIR) ) ; fi;
-
-
just_verify: testsuites master-stamp
-
if test "x$(TESTARGS)" = x ; then args="-F -a -v" ; \
-
else args="$(TESTARGS)" ; fi; \
-
$(RUNPIKE) -x test_pike $$args
-
-
valgrind_just_verify: testsuites master-stamp
-
if test "x$(TESTARGS)" = x ; then args="-a -v" ; \
-
else args="$(TESTARGS)" ; fi; \
-
$(VALGRIND) $(VALGRINDARGS) $(RUNPIKE) -x test_pike --subproc-start="$(VALGRIND) $(VALGRINDARGS)" $$args
-
-
dtrace_probes.h: $(SRCDIR)/dtrace/dtrace_probes.d
-
dtrace -h -s "$(SRCDIR)/dtrace/dtrace_probes.d" -o "$(TMP_BUILDDIR)/dtrace_probes.h"
-
-
-
# Testsuite for dynamic loading debugging
-
test_dlopen: dynloadtest.sh
-
sh ./dynloadtest.sh
-
-
dynloadtest.sh: $(SRCDIR)/test_dynamic_loading.in
-
m4 "$(SRCDIR)/test_dynamic_loading.in" >"$@"
-
-
dynloadtest.c: dynamic_load.c
-
-
dynloadtest@EXEEXT@: dynloadtest.o @EXTRA_OBJS@ fdlib.o port.o
-
$(LD) $(LDFLAGS) dynloadtest.o @EXTRA_OBJS@ fdlib.o port.o $(LIBS) -o $@
-
-
-
tinstall: master-stamp
-
-rm -rf test-install
-
$(RUNPIKE) $(TMP_BINDIR)/install.pike \
-
`test -f autodoc.xml || echo --no-autodoc` \
-
lib_prefix="$(lib_prefix)" \
-
TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \
-
SRCDIR="$(SRCDIR)" DOCDIR_SRC="$(DOCDIR_SRC)" \
-
MANDIR_SRC="$(MANDIR_SRC)" \
-
man_prefix="$(man_prefix)" fakeroot="$(buildroot)" \
-
PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)" pike_name="test-pike" \
-
cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \
-
prefix="./test-install" $(INSTALLARGS)
-
-
just-tinstall: master-stamp
-
$(RUNPIKE) $(TMP_BINDIR)/install.pike \
-
`test -f autodoc.xml || echo --no-autodoc` \
-
lib_prefix="$(lib_prefix)" \
-
TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \
-
SRCDIR="$(SRCDIR)" DOCDIR_SRC="$(DOCDIR_SRC)" \
-
MANDIR_SRC="$(MANDIR_SRC)" \
-
man_prefix="$(man_prefix)" fakeroot="$(buildroot)" \
-
PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)" pike_name="test-pike" \
-
cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \
-
prefix="./test-install" $(INSTALLARGS)
-
-
-
verify: testsuites tinstall
-
PIKE_MODULE_PATH=""; PIKE_INCLUDE_PATH=""; \
-
if test "$(TESTARGS)" = "" ; then args="-F -a -v" ; else \
-
args="$(TESTARGS)" ; fi; \
-
if test -f ./test-pike ; then \
-
./test-pike -DNOT_INSTALLED $(PIKEOPTS) -x test_pike $$args ; \
-
else \
-
if test -f some-sprsh-test ; then \
-
sprsh `pwd`/test-install/pike/*/bin/pike.exe -DNOT_INSTALLED $(PIKEOPTS) -x test_pike $$args ; \
-
else \
-
`pwd`/test-install/pike/*/bin/pike.exe -DNOT_INSTALLED $(PIKEOPTS) -x test_pike $$args ; \
-
fi \
-
fi
-
-
valgrind_verify: testsuites tinstall
-
PIKE_MODULE_PATH=""; PIKE_INCLUDE_PATH=""; \
-
if test "$(TESTARGS)" = "" ; then args="-a -v" ; else \
-
args="$(TESTARGS)" ; fi; \
-
if test -f ./test-pike ; then \
-
$(VALGRIND) $(VALGRINDARGS) ./test-pike -DNOT_INSTALLED $(PIKEOPTS) -x test_pike --subproc-start="$(VALGRIND) $(VALGRINDARGS)" $$args ; \
-
else \
-
sprsh `pwd`/test-install/pike/*/bin/pike.exe -DNOT_INSTALLED $(PIKEOPTS) -x test_pike $$args ; \
-
fi
-
-
bench: tinstall
-
if test -f ./test-pike ; then \
-
./test-pike -DNOT_INSTALLED $(PIKEOPTS) -x benchmark; \
-
else \
-
if test -f some-sprsh-test ; then \
-
sprsh `pwd`/test-install/pike/*/bin/pike.exe -DNOT_INSTALLED $(PIKEOPTS) -x benchmark ; \
-
else \
-
`pwd`/test-install/pike/*/bin/pike.exe -DNOT_INSTALLED $(PIKEOPTS) -x benchmark ; \
-
fi \
-
fi
-
-
verify_installed: testsuites master-stamp
-
if test "$(TESTARGS)" = "" ; then args="-F -a -v" ; else \
-
args="$(TESTARGS)" ; fi; \
-
$(bindir)/pike $(PIKEOPTS) -x test_pike $$args
-
-
check: verify
-
-
sure: verify
-
-
# verify / debug verbose
-
verbose_verify: testsuites master-stamp
-
if test "$(TESTARGS)" = "" ; then args="-F -a" ; else args="$(TESTARGS)" ; fi; \
-
$(RUNPIKE) -x test_pike -v -v $$args
-
-
# verify & debug VERBOSE
-
gdb_verify: testsuites master-stamp
-
@echo >.gdbinit handle SIGFPE nostop noprint pass
-
@echo >>.gdbinit handle SIGUSR1 nostop noprint pass
-
@echo >>.gdbinit handle SIGUSR2 nostop noprint pass
-
@echo >>.gdbinit handle SIGLWP nostop noprint pass
-
@if kill -l | grep SIGRTMIN >/dev/null ; then \
-
echo >>.gdbinit handle SIG32 nostop noprint pass ;\
-
else :; fi
-
@echo >>.gdbinit break debug_fatal
-
@echo >>.gdbinit break pike_gdb_breakpoint
-
@if test "$(TESTARGS)" = "" ; then args="-a -v -v" ; else \
-
args="$(TESTARGS)" ; fi; \
-
echo >>.gdbinit set args \
-
-m`echo "$(TMP_BUILDDIR)/master.pike" | ./posix_to_native.sh` \
-
$(PIKEOPTS) -x test_pike --no-watchdog $$args
-
$(GDB) $(TMP_BUILDDIR)/pike
-
@rm .gdbinit
-
-
gdb_hilfe: master.pike
-
@echo >.gdbinit handle SIGFPE nostop noprint pass
-
@echo >>.gdbinit handle SIGUSR1 nostop noprint pass
-
@echo >>.gdbinit handle SIGUSR2 nostop noprint pass
-
@echo >>.gdbinit handle SIGLWP nostop noprint pass
-
@if kill -l | grep SIGRTMIN >/dev/null ; then \
-
echo >>.gdbinit handle SIG32 nostop noprint pass ;\
-
else :; fi
-
@echo >>.gdbinit break debug_fatal
-
@echo >>.gdbinit break pike_gdb_breakpoint
-
@echo >>.gdbinit set args -m$(TMP_BUILDDIR)/master.pike $$ARGS
-
$(GDB) $(TMP_BUILDDIR)/pike
-
@rm .gdbinit
-
-
# fast test
-
fast_verify_testsuite: testsuite
-
PIKE_MODULE_PATH=""; PIKE_INCLUDE_PATH=""; \
-
if test "$(TESTARGS)" = "" ; then args="-F -a" ; \
-
else args="$(TESTARGS)" ; fi; \
-
if test -f ./test-pike ; then \
-
./test-pike -DNOT_INSTALLED $(PIKEOPTS) -x test_pike $$args ; \
-
else \
-
sprsh `pwd`/test-install/pike/*/bin/pike.exe -DNOT_INSTALLED \
-
$(PIKEOPTS) -x test_pike $$args ; \
-
fi
-
-
# run hilfe, for interactive testing
-
run_hilfe: master.pike
-
$(RUNPIKE) $(ARGS)
-
-
valgrind_hilfe: master.pike
-
$(VALGRIND) $(VALGRINDARGS) $(RUNPIKE) $(ARGS)
-
-
feature_list:
-
$(RUNPIKE) --features
-
-
run_bench:
-
$(RUNPIKE) $(ARGS) -x benchmark $(BENCHARGS)
-
-
lib: Makefile
-
@for d in lib lib/modules lib/include; do \
-
if [ -d $$d/. ]; then : ; else \
-
echo "Creating $$d/."; \
-
(mkdir $$d && chmod u+rwx $$d) || exit 1; \
-
fi ; \
-
done
-
@echo "Done."
-
-@touch ./lib 2>/dev/null || (touch lib/.broken_gnu_touch && rm lib/.broken_gnu_touch)
-
-
$(SRCDIR)/type_checker.c: type_checker-stamp
-
$(SRCDIR)/type_checker.h: type_checker-stamp
-
type_checker-stamp: $(SRCDIR)/type_checker.in $(SRCDIR)/make_type_checker.pike
-
$(RUNPIKE) $(SRCDIR)/make_type_checker.pike "$<" && touch "$@"
-
-
master.pike: $(LIBDIR_SRC)/master.pike.in Makefile
-
@if test "x$(PIKE_MODULE_RELOC)" = "x"; \
-
then u=s,x,x,; \
-
else u='s/^#undef PIKE_MODULE_RELOC/#define PIKE_MODULE_RELOC 1/'; \
-
fi; \
-
LC_ALL=C; export LC_ALL; \
-
cmd="sed -e 's!#lib_prefix#!`echo '$(TMP_LIBDIR)' | ./posix_to_native.sh`!' \
-
-e 's!#share_prefix#!`echo '$(LIBDIR_SRC)' | ./posix_to_native.sh`!' \
-
-e 's!#include_prefix#!`echo '$(TMP_BUILDDIR)/bundles/include/pike' | ./posix_to_native.sh`!' \
-
-e '$$u'"; \
-
echo "$$cmd <$(LIBDIR_SRC)/master.pike.in >master.pike"; \
-
eval $$cmd <$(LIBDIR_SRC)/master.pike.in >master.pike || { rm "master.pike"; exit 1; }
-
-
# Want master.pike up-to-date, but yet there's no dependency on the
-
# that file. Works like the .h_src.h target.
-
master-stamp: master.pike
-
@test -f master-stamp || echo foo > master-stamp
-
-
#
-
# Documentation related stuff.
-
#
-
-
onepage.xml: autodoc.xml $(DOCDIR)/structure/onepage.xml
-
(cd "$(DOCDIR)" && \
-
$(RUNPIKE) -x assemble_autodoc structure/onepage.xml \
-
$(TMP_BUILDDIR)/autodoc.xml) >onepage.xml || { rm "$@"; exit 1; }
-
-
traditional.xml: autodoc.xml $(DOCDIR)/structure/traditional.xml
-
( cd "$(DOCDIR)" && \
-
$(RUNPIKE) -x assemble_autodoc structure/traditional.xml \
-
$(TMP_BUILDDIR)/autodoc.xml) >traditional.xml || { rm "$@"; exit 1; }
-
-
modref.xml: autodoc.xml $(DOCDIR)/structure/modref.xml
-
(cd "$(DOCDIR)" && \
-
$(RUNPIKE) -x assemble_autodoc structure/modref.xml \
-
$(TMP_BUILDDIR)/autodoc.xml) >modref.xml || { rm "$@"; exit 1; }
-
-
autodoc.xml: pike-complete-stamp doc_build/src doc_build/lib doc_build/images images1 images2 force
-
$(RUNPIKE) -x extract_autodoc -q --srcdir=$(SRCDIR) \
-
--imgsrc=$(DOCDIR)/src_images --builddir=doc_build/src \
-
--imgdir=doc_build/images
-
$(RUNPIKE) -x extract_autodoc -q --srcdir=$(LIBDIR_SRC) \
-
--imgsrc=$(DOCDIR)/src_images --builddir=doc_build/lib \
-
--imgdir=doc_build/images
-
$(RUNPIKE) -x join_autodoc --quiet --post-process autodoc.xml doc_build
-
-
autodoc-stamp:
-
@test -f autodoc.xml || $(MAKE) autodoc.xml
-
@test -f autodoc-stamp || echo foo > autodoc-stamp
-
-
images1: doc_build/src/post_modules/GTK1/refdoc/images
-
@cp $(SRCDIR)/post_modules/GTK1/refdoc/images/*.png \
-
doc_build/src/post_modules/GTK1/refdoc/images/
-
-
images2: doc_build/src/post_modules/GTK2/refdoc/images
-
@cp $(SRCDIR)/post_modules/GTK2/refdoc/images/*.png \
-
doc_build/src/post_modules/GTK2/refdoc/images/
-
-
# Directories
-
-
doc_build:
-
@test -d doc_build || mkdir doc_build
-
-
doc_build/src: doc_build
-
@test -d doc_build/src || mkdir doc_build/src
-
-
doc_build/lib: doc_build
-
@test -d doc_build/lib || mkdir doc_build/lib
-
-
doc_build/images: doc_build
-
@test -d doc_build/images || mkdir doc_build/images
-
-
doc_build/src/post_modules: doc_build/src
-
@test -d doc_build/src/post_modules || \
-
mkdir doc_build/src/post_modules
-
-
doc_build/src/post_modules/GTK1/refdoc/images: doc_build/src/post_modules
-
@test -d doc_build/src/post_modules/GTK1 || \
-
mkdir doc_build/src/post_modules/GTK1
-
@test -d doc_build/src/post_modules/GTK1/refdoc || \
-
mkdir doc_build/src/post_modules/GTK1/refdoc
-
@test -d doc_build/src/post_modules/GTK1/refdoc/images || \
-
mkdir doc_build/src/post_modules/GTK1/refdoc/images
-
-
doc_build/src/post_modules/GTK2/refdoc/images: doc_build/src/post_modules
-
@test -d doc_build/src/post_modules/GTK2 || \
-
mkdir doc_build/src/post_modules/GTK2
-
@test -d doc_build/src/post_modules/GTK2/refdoc || \
-
mkdir doc_build/src/post_modules/GTK2/refdoc
-
@test -d doc_build/src/post_modules/GTK2/refdoc/images || \
-
mkdir doc_build/src/post_modules/GTK2/refdoc/images
-
-
doc_clean:
-
-rm -f onepage.xml traditional.xml modref.xml autodoc.xml resolution.log
-
-rm -rf doc_build
-
-
-
pike.syms: $(SRCDIR)/interpret.c $(SRCDIR)/interpreter.h $(SRCDIR)/program.c $(SRCDIR)/builtin_functions.c
-
( cat $(SRCDIR)/*.h *.h | egrep '^[ ]*#[ ]*define[ ][ ]*[a-zA-Z_0-9]*[ ][ ]*[0-9][xabcdefABCDEF0-9]*[ ]*' ; \
-
echo "#define" `$(CPP) $(PREFLAGS) -DSTEP_BREAK_LINE='STEP_BREAK_LINE __LINE__' $(SRCDIR)/interpreter.h | grep STEP_BREAK_LINE` ) >pike.syms
-
-
# We touch the files that depend on language.h_src and
-
# interpret_protos.h_src to ensure that the .h_src.h rule doesn't have
-
# anything to do in the dist.
-
source: depend
-
if test -f $(SRCDIR)/language.c; then touch $(SRCDIR)/language.c; else :; fi
-
if test -f $(SRCDIR)/language.h; then touch $(SRCDIR)/language.h; else :; fi
-
if test -f $(SRCDIR)/interpret_protos.h; then touch $(SRCDIR)/interpret_protos.h; else :; fi
-
-
# make export archive (requires compiled Pike)
-
# Do not compile in source tree if you want to use this!
-
# Beware that export archive this includes bison/yacc/byacc source
-
# and thus has to follow the rules stated in that code.
-
-
full_export: source
-
chmod +x $(SRCDIR)/install-sh
-
$(RUNPIKE) $(TMP_BINDIR)/export.pike --srcdir="$(SRCDIR)" \
-
--exportlist="$(SRCDIR)/export_list" --name=Pike-v%maj.%min.%bld \
-
--tag $(EXPORTARGS)
-
-
EXPORT_NAME=Pike-v%maj.%min-%Y%M%D
-
snapshot_export: source
-
chmod +x $(SRCDIR)/install-sh
-
$(RUNPIKE) $(TMP_BINDIR)/export.pike --srcdir="$(SRCDIR)" \
-
--exportlist="$(SRCDIR)/export_list" --name=$(EXPORT_NAME) \
-
$(EXPORTARGS)
-
-
export: full_export
-
-
bin_export:
-
@rm -f *.burk
-
@no_autodoc="--no-autodoc"; \
-
if [ -f autodoc.xml ]; then no_autodoc=""; fi; \
-
$(RUNPIKE) $(TMP_BINDIR)/install.pike --export $$no_autodoc \
-
@INSTALL_EXPORT_ARGS@ \
-
exec_prefix="$(bindir)" lib_prefix="$(lib_prefix)" \
-
TMP_LIBDIR="$(TMP_LIBDIR)" LIBDIR_SRC="$(LIBDIR_SRC)" \
-
SRCDIR="$(SRCDIR)" prefix="$(prefix)" DOCDIR_SRC="$(DOCDIR_SRC)" \
-
MANDIR_SRC="$(MANDIR_SRC)" \
-
BASEDIR="$(BASEDIR)" man_prefix="$(man_prefix)" \
-
cflags="@DYNAMIC_MODULE_FLAGS@" ldflags="" \
-
pike_name=$(pike_name) PIKE_MODULE_RELOC="$(PIKE_MODULE_RELOC)"
-
@case " $(CC)" in \
-
*\ rnt*) \
-
$(MAKE) $(MAKE_FLAGS) uncompress_header ;\
-
echo "Compressing..." ;\
-
filename=`echo *.burk | sed 's@\.burk$$@@g'`.exe ;\
-
( cat uncompress_header.exe ; gzip -9 -c *.burk ) > $$filename ;\
-
echo "Done." ;\
-
;; \
-
esac
-
-
#new_peep_engine:
-
# $(RUNTPIKE) $(TMP_BINDIR)/mkpeep.pike $(SRCDIR)/peep.in >$(SRCDIR)/peep_engine.c
-
# $(RUNTPIKE) $(TMP_BINDIR)/make_ci.pike <$(SRCDIR)/UnicodeData.txt >$(SRCDIR)/case_info.h
-
-
$(SRCDIR)/peep_engine.c: $(SRCDIR)/peep.in $(TMP_BINDIR)/mkpeep.pike
-
./precompile.sh $(TMP_BINDIR)/mkpeep.pike $(SRCDIR)/peep.in >$(SRCDIR)/peep_engine.c || ( rm $(SRCDIR)/peep_engine.c ; exit 1 )
-
-
peep.o: $(SRCDIR)/peep_engine.c
-
-
$(SRCDIR)/whitespace.h: $(SRCDIR)/UnicodeData.txt $(TMP_BINDIR)/getwhitespace.sh
-
$(TMP_BINDIR)/getwhitespace.sh >$(SRCDIR)/whitespace.h \
-
<$(SRCDIR)/UnicodeData.txt
-
-
$(SRCDIR)/case_info.h: $(SRCDIR)/UnicodeData.txt $(TMP_BINDIR)/make_ci.pike
-
./precompile.sh $(TMP_BINDIR)/make_ci.pike $(SRCDIR)/case_info.h \
-
<$(SRCDIR)/UnicodeData.txt
-
-
builtin_functions.o: $(SRCDIR)/case_info.h $(SRCDIR)/combine_path.h
-
-
$(SRCDIR)/treeopt.h: $(SRCDIR)/treeopt.in $(TMP_BINDIR)/mktreeopt.pike
-
./precompile.sh $(TMP_BINDIR)/mktreeopt.pike $(SRCDIR)/treeopt.in || ( rm $(SRCDIR)/treeopt.h ; exit 1 )
-
-
las.o: $(SRCDIR)/treeopt.h
-
-
# This dependency is here to make sure that lexer[012].h are generated.
-
# The reason for the split is that some compilers (read cl) generate
-
# better code then. Strange, but true.
-
lex.o: lexer0.h lexer1.h lexer2.h
-
-
lex.protos: lexer0.h lexer1.h lexer2.h
-
-
lexer0.h: lexer.h
-
cp "$(SRCDIR)/lexer.h" "$@"
-
-
lexer1.h: lexer.h
-
cp "$(SRCDIR)/lexer.h" "$@"
-
-
lexer2.h: lexer.h
-
cp "$(SRCDIR)/lexer.h" "$@"
-
-
-
# unbug needs interpreter_nd.h to be able to
-
# set separate breakpoints in eval_instruction_with/without_debug
-
interpreter_debug.h: interpreter.h
-
cp "$(SRCDIR)/interpreter.h" "$@"
-
-
interpret.o: interpreter_debug.h $(SRCDIR)/interpret_functions_fixed.h
-
-
# make dependencies
-
depend: $(SRC_TARGETS)
-
gcc -MM -MG $(PREFLAGS) $(SRCDIR)/*.c | $(TMP_BINDIR)/fixdepends.sh "$(SRCDIR)" "$(SRCDIR)" /dev/null
-
-@(while :; do \
-
echo foo > cfl.$@; test "`echo cfl.*`" = cfl.$@ && break; \
-
rm cfl.$@; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \
-
arb=37; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \
-
done;)
-
CONFIG_FILES=Makefile CONFIG_HEADERS="" ./config.status || \
-
(EXITCODE=$$?; rm cfl.$@; exit $$EXITCODE)
-
-@rm cfl.$@
-
@( cd modules && { \
-
rm -f remake; \
-
$(MAKE) $(MAKE_FLAGS) depend || \
-
{ test -f remake && $(MAKE) $(MAKE_FLAGS) depend; }; \
-
})
-
@if [ "x$(RUNPIKE)" != "x$(DEFAULT_RUNPIKE)" -o -x $(TMP_BUILDDIR)/pike ]; then \
-
$(MAKE) $(MAKE_FLAGS) post_modules_depend; \
-
else \
-
echo "Skipping make depend in post_modules since a fresh pike is"; \
-
echo "needed to make the autogenerated sources there."; \
-
:; \
-
fi
-
-
post_modules_depend:
-
@if [ "x$(RUNPIKE)" != "x$(DEFAULT_RUNPIKE)" -o -x $(TMP_BUILDDIR)/pike ]; then :; \
-
else $(MAKE) $(MAKE_FLAGS) $(MAKE_PARALLEL) pike@EXEEXT@; fi
-
@( cd post_modules && { \
-
rm -f remake; \
-
$(MAKE) $(MAKE_FLAGS) depend || \
-
{ test -f remake && $(MAKE) $(MAKE_FLAGS) depend; }; \
-
})
-
-
#
-
# Pike internal targets
-
#
-
-
# touch static-modules-stamp here to avoid doing this work again if
-
# that target is checked later.
-
static_module_objects: $(MODULE_REQUIREMENTS)
-
@MODULE_BUILD_TYPE=static; \
-
export MODULE_BUILD_TYPE; \
-
( cd modules && ( rm remake >/dev/null 2>&1 || : ) && \
-
( $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) || \
-
( test -f remake && $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) ) ) \
-
) || exit $$?
-
@touch static-modules-stamp
-
-
static-modules-stamp: $(MODULE_REQUIREMENTS)
-
@MODULE_BUILD_TYPE=static; \
-
export MODULE_BUILD_TYPE; \
-
( cd modules && ( rm remake >/dev/null 2>&1 || : ) && \
-
( $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) || \
-
( test -f remake && $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) ) ) \
-
) || exit $$?
-
@touch static-modules-stamp
-
-
dynamic_module_objects: $(MODULE_REQUIREMENTS) @LDSHARED_BASE_REQS@
-
@MODULE_BUILD_TYPE=dynamic; \
-
export MODULE_BUILD_TYPE; \
-
( cd modules && ( rm remake >/dev/null 2>&1 || : ) && \
-
( $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) || \
-
( test -f remake && $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) ) ) \
-
) || exit $$?
-
@touch dynamic-modules-stamp
-
-
dynamic-modules-stamp: $(MODULE_REQUIREMENTS) @LDSHARED_BASE_REQS@
-
@MODULE_BUILD_TYPE=dynamic; \
-
export MODULE_BUILD_TYPE; \
-
( cd modules && ( rm remake >/dev/null 2>&1 || : ) && \
-
( $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) || \
-
( test -f remake && $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) ) ) \
-
) || exit $$?
-
@touch dynamic-modules-stamp
-
-
# Use submakes here to ensure both correct sequencing and that all
-
# modules are properly rechecked.
-
module_objects:
-
@$(MAKE) $(MAKE_FLAGS) static_module_objects
-
@$(MAKE) $(MAKE_FLAGS) dynamic_module_objects
-
-
modules/modlist.h: static-modules-stamp
-
-
modules/modlist_headers.h: static-modules-stamp
-
-
modules/linker_options: static-modules-stamp
-
-
post-module-pike-stamp: @BUILD_PIKE@ dynamic-modules-stamp
-
@touch post-module-pike-stamp
-
-
module.o: modules/modlist_headers.h modules/modlist.h post_modules/modlist_headers.h post_modules/modlist.h
-
-
tmodule.o: modules/modlist_headers.h modules/modlist.h
-
-
# Backward compat.
-
post_modules: post_module_objects
-
-
post_module_objects: $(MODULE_REQUIREMENTS) post-module-pike-stamp @LDSHARED_BASE_REQS@
-
@MODULE_BUILD_TYPE=@POST_MODULE_BUILD_TYPE@; \
-
export MODULE_BUILD_TYPE; \
-
( cd post_modules && ( rm remake >/dev/null 2>&1 || : ) && \
-
( $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) || \
-
( test -f remake && $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) ) ) \
-
) || exit $$?
-
@touch post-modules-stamp
-
-
post-modules-stamp: $(MODULE_REQUIREMENTS) post-module-pike-stamp @LDSHARED_BASE_REQS@
-
@MODULE_BUILD_TYPE=@POST_MODULE_BUILD_TYPE@; \
-
export MODULE_BUILD_TYPE; \
-
( cd post_modules && ( rm remake >/dev/null 2>&1 || : ) && \
-
( $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) || \
-
( test -f remake && $(MAKE) $(MAKE_PARALLEL) $(MAKE_FLAGS) ) ) \
-
) || exit $$?
-
@touch post-modules-stamp
-
-
post_modules/modlist_headers.h: post-modules-stamp
-
-
post_modules/modlist.h: post-modules-stamp
-
-
post_modules/linker_options: post-modules-stamp
-
-
pike-complete-stamp: pike post-modules-stamp
-
@touch pike-complete-stamp
-
-
$(SRCDIR)/interpret_protos.h_src: $(SRCDIR)/interpret_functions.h $(SRCDIR)/strip_opcodes
-
$(CPP) $(PREFLAGS) -DGEN_PROTOS $(SRCDIR)/interpret_functions.h | $(SRCDIR)/strip_opcodes >$(SRCDIR)/interpret_protos.h_src || { rm $(SRCDIR)/interpret_protos.h_src; exit 1; }
-
-
lex.o: $(SRCDIR)/lex.c $(SRCDIR)/interpret_protos.h
-
-
interpret.o: $(SRCDIR)/lex.c $(SRCDIR)/interpret_protos.h @DTRACE_REQUIREMENTS@
-
-
lex_t.o: $(SRCDIR)/lex_t.c $(SRCDIR)/interpret_protos.h
-
-
language.o: $(SRCDIR)/language.c $(SRCDIR)/object.h $(SRCDIR)/interpret.h $(SRCDIR)/program.h
-
-
$(SRCDIR)/language.c_src $(SRCDIR)/language.h_src: $(SRCDIR)/language.yacc
-
@echo "Expect 1 shift/reduce conflict."
-
cd $(SRCDIR) && $(YACC) $(YFLAGS) language.yacc
-
mv $(SRCDIR)/y.tab.c $(SRCDIR)/language.c_src
-
mv $(SRCDIR)/y.tab.h $(SRCDIR)/language.h_src
-
-
$(SRCDIR)/language.c: $(SRCDIR)/language.c_src
-
sed -e 's/YY_COUNT_TYPE/@YY_COUNT_TYPE@/' \
-
-e 's/YY_FROM_CONST/@YY_FROM_CONST@/' \
-
-e 's/short[ ]*int[ ]/\/* short *\/ int /g' \
-
-e 's/(short[ ]*int)/(\/* short *\/ int)/g' \
-
< $(SRCDIR)/language.c_src > $(SRCDIR)/language.c
-
-
$(SRCDIR)/interpret_functions_fixed.h: $(SRCDIR)/interpret_functions.h precompile.sh-stamp
-
./precompile.sh --cache make_interpret_functions.pike >"$@" "$(SRCDIR)/interpret_functions.h" || { rm "$@"; exit 1; }
-
-
# UnixWare make needs help to find the source file...
-
builtin.o: $(SRCDIR)/builtin.c $(SRCDIR)/whitespace.h
-
-
iterators.o: $(SRCDIR)/iterators.c
-
-
facetgroup.o: $(SRCDIR)/facetgroup.c
-
-
backend.o: $(SRCDIR)/backend.c
-
-
libpike.o: $(SRCDIR)/libpike.c
-
-
# Internal testing target
-
run_yacc: $(SRCDIR)/language.c
-
-
$(SRCDIR)/configure $(SRCDIR)/stamp-h.in: $(SRCDIR)/configure.in $(SRCDIR)/aclocal.m4 $(SRCDIR)/acconfig.h
-
cd $(SRCDIR) && ./run_autoconfig --no-recursion .
-
echo foo > $(SRCDIR)/stamp-h.in
-
-
config.status propagated_variables: $(SRCDIR)/configure $(SRCDIR)/make_variables.in
-
./config.status --recheck
-
@test -f propagated_variables && touch propagated_variables
-
-
modules/common_module_makefile: $(SRCDIR)/modules/common_module_makefile.in config.status
-
-@(while :; do \
-
echo foo > cfl.common_module_makefile; test "`echo cfl.*`" = cfl.common_module_makefile && break; \
-
rm cfl.common_module_makefile; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \
-
arb=17; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \
-
done;)
-
CONFIG_FILES=modules/common_module_makefile CONFIG_HEADERS="" ./config.status || \
-
(EXITCODE=$$?; rm cfl.common_module_makefile; exit $$EXITCODE)
-
-@rm cfl.common_module_makefile
-
-
modules/static_module_makefile post_modules/static_module_makefile: modules/common_module_makefile $(SRCDIR)/modules/static_module_makefile.in config.status
-
-@(while :; do \
-
echo foo > cfl.static_module_makefile; test "`echo cfl.*`" = cfl.static_module_makefile && break; \
-
rm cfl.static_module_makefile; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \
-
arb=17; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \
-
done;)
-
CONFIG_FILES="modules/static_module_makefile post_modules/static_module_makefile:modules/static_module_makefile.in" CONFIG_HEADERS="" ./config.status || \
-
(EXITCODE=$$?; rm cfl.static_module_makefile; exit $$EXITCODE)
-
-@rm cfl.static_module_makefile
-
-
modules/dynamic_module_makefile post_modules/dynamic_module_makefile: modules/common_module_makefile $(SRCDIR)/@dmmsrc@ config.status
-
-@(while :; do \
-
echo foo > cfl.dynamic_module_makefile; test "`echo cfl.*`" = cfl.dynamic_module_makefile && break; \
-
rm cfl.dynamic_module_makefile; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \
-
arb=19; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \
-
done;)
-
CONFIG_FILES="modules/dynamic_module_makefile:@dmmsrc@ post_modules/dynamic_module_makefile:@dmmsrc@" CONFIG_HEADERS="" ./config.status || \
-
(EXITCODE=$$?; rm cfl.dynamic_module_makefile; exit $$EXITCODE)
-
-@rm cfl.dynamic_module_makefile
-
-
Makefile: $(SRCDIR)/Makefile.in $(SRCDIR)/dependencies config.status
-
-@(while :; do \
-
echo foo > cfl.$@; test "`echo cfl.*`" = cfl.$@ && break; \
-
rm cfl.$@; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \
-
arb=23; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \
-
done;)
-
CONFIG_FILES=Makefile CONFIG_HEADERS="" ./config.status || \
-
(EXITCODE=$$?; rm cfl.$@; exit $$EXITCODE)
-
-@rm cfl.$@
-
touch remake
-
@echo "Run make again"
-
@exit 1
-
-
precompile.sh: $(SRCDIR)/precompile.sh.in ./config.status
-
-@(while :; do \
-
echo foo > cfl.$@; test "`echo cfl.*`" = cfl.$@ && break; \
-
rm cfl.$@; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \
-
arb=29; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \
-
done;)
-
CONFIG_FILES=precompile.sh CONFIG_HEADERS="" ./config.status || \
-
(EXITCODE=$$?; rm cfl.$@; exit $$EXITCODE)
-
-@rm cfl.$@
-
-
# A dependency on precompile.sh-stamp only ensures that precompile.sh
-
# exists, not that it's older than the target. In source dists,
-
# precompile.sh is almost always newer than the targets that depend on
-
# it, e.g. builtin.c that comes with the dist.
-
#
-
# The date stamp used to be 0103000070, but that seems to confuse some
-
# recent OS's, that haven't heard of the 70's...
-
#
-
# Note that gnu touch is stupid, and warns about the syntax; thus the
-
# redirect of stderr.
-
#
-
# BSD make is stupid, and doesn't restat precompile.sh-stamp and
-
# recalculate the dependencies after executing the rule, thus the
-
# recursive use of make.
-
precompile.sh-stamp:
-
@if [ -f precompile.sh ]; then :; else $(MAKE) precompile.sh; fi
-
@touch 0101010185 precompile.sh-stamp 2>/dev/null
-
-
$(SRCDIR)/machine.h.in: $(SRCDIR)/stamp-h.in
-
@if test -f $(SRCDIR)/machine.h.in; then :; else \
-
rm $(SRCDIR)/stamp-h.in; $(MAKE) $(SRCDIR)/stamp-h.in; \
-
fi
-
-
machine.h: stamp-h
-
@if test -f machine.h; then :; else \
-
rm stamp-h; $(MAKE) stamp-h; \
-
fi
-
-
stamp-h: $(SRCDIR)/stamp-h.in $(SRCDIR)/machine.h.in config.status
-
-@(while :; do \
-
echo foo > cfl.$@; test "`echo cfl.*`" = cfl.$@ && break; \
-
rm cfl.$@; echo "Waiting to run config.status serially:" cfl.*; sleep 1; \
-
arb=31; while test $$arb != 0; do arb=`expr $$arb - 1`; done; \
-
done;)
-
CONFIG_FILES="" CONFIG_HEADERS=machine.h ./config.status || \
-
(EXITCODE=$$?; rm cfl.$@; exit $$EXITCODE)
-
touch stamp-h
-
-@rm cfl.$@
-
-
testsuite: $(SRCDIR)/testsuite.in $(TMP_BINDIR)/mktestsuite
-
if test "$$PIKE_PATH_TRANSLATE" = ""; then \
-
$(TMP_BINDIR)/mktestsuite $(SRCDIR)/testsuite.in >testsuite \
-
-DSRCDIR="`echo $(SRCDIR)|./posix_to_native.sh`"; \
-
else \
-
$(TMP_BINDIR)/mktestsuite $(SRCDIR)/testsuite.in >testsuite \
-
-DSRCDIR="`echo $(SRCDIR)|sed -e $$PIKE_PATH_TRANSLATE|./posix_to_native.sh`"; \
-
fi
-
-
header_uncompress: $(SRCDIR)/uncompressor.c
-
$(CC) -O2 -static $(SRCDIR)/uncompressor.c -o header_uncompress @UNCOMPRESS_LIBZ@
-
-
uncompress_header: $(SRCDIR)/uncompressor.c header_uncompress
-
$(CC) -O2 -static $(SRCDIR)/uncompressor.c -o uncompress_header @UNCOMPRESS_LIBZ@ -DSEEK_TO=`wc -c header_uncompress|sed 's/[^0-9]//g'`
-
test "`wc -c header_uncompress|sed 's/[^0-9]//g'`" = "`wc -c uncompress_header|sed 's/[^0-9]//g'`"
-
-
HFILES= \
-
operators.protos \
-
array.protos \
-
fd_control.protos \
-
backend.protos \
-
fdlib.protos \
-
bignum.protos \
-
fsort.protos \
-
pike_memory.protos \
-
pike_types.protos \
-
gc.protos \
-
port.protos \
-
callback.protos \
-
hashtable.protos \
-
program.protos \
-
interpret.protos \
-
constants.protos \
-
language.protos \
-
queue.protos \
-
cpp.protos \
-
rusage.protos \
-
cyclic.protos \
-
lex.protos \
-
security.protos \
-
signal_handler.protos \
-
pike_search.protos \
-
docode.protos \
-
main.protos \
-
stralloc.protos \
-
mapping.protos \
-
stuff.protos \
-
dynamic_buffer.protos \
-
svalue.protos \
-
dynamic_load.protos \
-
module_support.protos \
-
threads.protos \
-
multiset.protos \
-
encode.protos \
-
object.protos \
-
error.protos \
-
opcodes.protos \
-
version.protos \
-
builtin.protos \
-
iterators.protos \
-
facetgroup.protos \
-
rbtree.protos
-
-
$(HFILES): precompile.sh-stamp
-
-
import-stamp: $(HFILES) precompile.sh-stamp
-
@./precompile.sh fake_dynamic_load.pike >import_functions.tmp $(HFILES)
-
@cmp import_functions.tmp import_functions.h >/dev/null || mv import_functions.tmp import_functions.h
-
@echo hej >import-stamp
-
-
import_functions.h: import-stamp
-
test -f import-stamp || ( rm import-stamp ; $(MAKE) import-stamp )
-
-
export_functions.c: import_functions.h
-
touch export_functions.c
-
-
# Must have manual depends on all the bytecode methods in the code
-
# dir, since make depend will only include the one that was chosen,
-
# and that doesn't suffice in source dists.
-
-
$(SRCDIR)/pikecode.h: \
-
$(SRCDIR)/code/ia32.h \
-
$(SRCDIR)/code/amd64.h \
-
$(SRCDIR)/code/sparc.h \
-
$(SRCDIR)/code/ppc32.h \
-
$(SRCDIR)/code/ppc64.h \
-
$(SRCDIR)/code/computedgoto.h \
-
$(SRCDIR)/code/bytecode.h
-
touch $(SRCDIR)/pikecode.h
-
-
$(SRCDIR)/pikecode.c: \
-
$(SRCDIR)/code/ia32.c \
-
$(SRCDIR)/code/amd64.c \
-
$(SRCDIR)/code/sparc.c \
-
$(SRCDIR)/code/ppc32.c \
-
$(SRCDIR)/code/ppc64.c \
-
$(SRCDIR)/code/computedgoto.c \
-
$(SRCDIR)/code/bytecode.c
-
touch $(SRCDIR)/pikecode.c
-
-
@dependencies@
+
Newline at end of file removed.